Re: Troubleshooting - RP Announcement Filter

Biddu,

I think what you will need to do is make an ACL that matches all hosts
except 10.224.1.2 and then another ACL that denies all groups. Then apply
another rp-announce-filter. The command you have basically filters groups
(well actually it allows all groups) for that RP specified in the ACL.

On Tue, Jun 23, 2009 at 10:47 PM, Biddu Mehta <biddumehta_at_gmail.com> wrote:

> Not able to get the desired results for RP Announcement Filter .
>
> Topology is from Jeff Doyle .Fig 6-5
>
>
>
>
>
> Not getting desired results on BOWLER
>
> PORKPIE#sh running-config | i rp
> ip pim send-rp-discovery Loopback0 scope 15
> ip pim rp-announce-filter rp-list 55 group-list 66
> PORKPIE#
> PORKPIE#sh ip acce
> PORKPIE#sh ip access-lists 55
> Standard IP access list 55
> 10 permit 10.224.1.2 (24 matches)
> PORKPIE#
> PORKPIE#sh ip access-lists 66
> Standard IP access list 66
> 10 permit 224.0.0.0, wildcard bits 15.255.255.255 (24 matches)
> PORKPIE#
>
> ------------------------------------------------------------
>
> BOWLER#sh ip pim rp ma
> BOWLER#sh ip pim rp mapping
> PIM Group-to-RP Mappings
> Group(s) 224.0.0.0/5
> RP 10.224.1.1 (?), v2v1
> Info source: 10.224.1.3 (?), elected via Auto-RP
> Uptime: 00:03:54, expires: 00:02:00
> Group(s) 232.0.0.0/5
> RP 10.224.1.2 (?), v2v1
> Info source: 10.224.1.3 (?), elected via Auto-RP
> Uptime: 00:04:12, expires: 00:02:44
> BOWLER#
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Bryan Bartik
CCIE #23707 (R&S), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net