RE: ospf "show ip ospf route" output doubt

Very interesting Rakesh! I am thinking this must be a hidden command. It
is not in the 12.4T command references or master index. When I try this on
a 3800 series it works, but the command is also not listed using ?

With that being said, I can't really speak intelligently on this command,
but would love to know more from anybody that knows about it

Regards,

Joe Astorino
CCIE #24347 (R&S)
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
  

From: rakesh m [mailto:raaki.88_at_gmail.com]
Sent: Tuesday, June 23, 2009 9:28 AM
To: Joe Astorino
Cc: Cisco certification
Subject: Re: ospf "show ip ospf route" output doubt

(ro(172.16.23.0 area 0)--->r1(172.16.123.0 area 1)----->r2(area1 , lo in
area 2)

r0#show version
Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version
12.4(15)T5, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Wed 30-Apr-08 18:27 by prod_rel_team

ROM: ROMMON Emulation Microcode
ROM: 3700 Software (C3725-ADVENTERPRISEK9-M), Version 12.4(15)T5, RELEASE
SOFTWARE (fc4)

r0 uptime is 16 minutes
System returned to ROM by unknown reload cause - suspect
boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
System image file is "tftp://255.255.255.255/unknown"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export_at_cisco.com.

Cisco 3725 (R7000) processor (revision 0.1) with 124928K/6144K bytes of
memory.
Processor board ID XXXXXXXXXXX
R7000 CPU at 240MHz, Implementation 39, Rev 2.1, 256KB L2, 512KB L3 Cache
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity enabled.
55K bytes of NVRAM.
16384K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2142

r0#show ip ospf route

            OSPF Router with ID (0.0.0.1) (Process ID 1)

    Area BACKBONE(0)

    Intra-area Route List
* 172.16.26.0/24, Intra, cost 10, area 0, Connected
      via 172.16.26.1, FastEthernet0/0

    Intra-area Router Path List
i 0.0.0.3 [74] via 172.16.26.2, FastEthernet0/0, ABR, Area 0, SPF 16
i 172.16.26.2 [10] via 172.16.26.2, FastEthernet0/0, ABR, Area 0, SPF 16

    Inter-area Route List
*> 172.16.22.2/32, Inter, cost 75, area 0
      via 172.16.26.2, FastEthernet0/0
*> 172.16.123.0/24, Inter, cost 74, area 0
      via 172.16.26.2, FastEthernet0/0

-- 
I have super powers i just dont wanna show you..
http://diaryofccie.blogspot.com
Checked by AVG - www.avg.com
Version: 8.5.374 / Virus Database: 270.12.89/2197 - Release Date: 06/23/09
05:54:00
Blogs and organic groups at http://www.ccie.net