Re: VRF - VPN4 Problem

> Dayaa.
>
> You mean the destination network is in the bgp table as a vpnv4 prefix, but
> not in the vrf routing table?
> This must be because you cant reach the BGP NEXT HOP by your provider IGP.
> Check also if you are using the correct RT values to import into the VRF.
>
> Also after you can succesfully import the routes from the other provider
> into the vrf, be sure that a complet LSP exist from PE provider a, to PE
> provider B.
>
> let me know if it help you.
>
> #21813 R&S
>
> 2009/6/22 Dayaa Al Zoubi <cciecool_at_gmail.com>
>
> hi
>> two different bgp areas means two different sp , the VPN4
>> connectivity
>> between them , in the border router sh ip route will not show the customer
>> routes , sh ip bgp vpn4 all will show , but when pinging from the customer
>> vrf in sp 1 to vrf in sp2 the border and debug the ip packet in the
>> border
>> router , it the destination unroutable !!!!!
>> so the destination not in the routing table but in the vpn4 table and the
>> router not checking this table !!!!
>> why is that ......
>>
>> thansk
>> dayaa
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 22 2009 - 15:38:42 ART