Re: How do I trace OSPF auth password

"Debug ip packet dump" should do it. Use an ACL that filters for just the
specific source of R1 and is destined to 224.0.0.5 as the input for the
debug. Then convert your hex output into ASCII with a tool (Ultraedit or
something similar) and look for a string. That's one way, but there's
probably a better one.

On 6/9/09 2:15 PM, "Fahad Khan" <fahad.khan_at_gmail.com> wrote:

> Dear All,
>
> Lets say I need to make adj between R1 and R2 connected via any media. I
> donot have the access of R1 and only have the access of R2. R1 is
> preconfigured but the problem is OSPF authentication(simple clear text
> auth) is also enabled on that, now how do i trace on R2 to get the password
> that is configured on R1 for ospf auth. Are there any debug options?
>
> thanks in advance

Cheers,

Jared Scrivener CCIE3 #16983 (R&S, Security, SP), CISSP
Sr. Technical Instructor - IPexpert, Inc.
URL: http://www.IPexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: jscrivener_at_ipexpert.com

Blogs and organic groups at http://www.ccie.net
Received on Tue Jun 09 2009 - 14:55:25 ART