Re: Please confirm (conf#c72145da9975cdbf1de58bab49341769)

Cisco certification wrote:
> Hi,
>
> You have tried to post to a GroupStudy.com certification mailing list. Because
> the server does not recognize you as a confirmed poster, you will be required
> to authenticate that you are using a valid e-mail address and are not a
> spammer. By confirming this e-mail you certify that you are not sending
> Unsolicited Bulk Email (UBE).
>
> PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS EMAIL
> YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE POSTED.
>
>
> By confirming this e-mail you also certify the following:
>
> 1. The message does NOT break Cisco's Non-Disclosure requirements.
>
> 2. The message is NOT designed to advertise a commercial product.
>
> 3. You understand all postings become property of GroupStudy.com
>
> 4. You have searched the archives prior to posting.
>
> 5. The message is NOT inflammatory.
>
> 6. The message is NOT a test message.
>
> To confirm, simply reply to this message. No editing is necessary. Once
> confirmed, you will be able to post without additional confirmations.
>
>
> Welcome to GroupStudy.com!
>
>
> First time posters to GroupStudy.com are required to agree to the GroupStudy terms and conditions.
> Replying to this email, certifies you have read and agree to the GroupStudy posting guidelines and terms and conditions.
>
> --- Original Message Follows ---
>
> Date: Sun, 07 Jun 2009 19:04:51 +0200
> From: Peter CCIE <study_at_beukenkamp.nl>
> To: Cisco certification <ccielab_at_groupstudy.com>
> Subject: Dynagen - saving configurations
>
> Hi all,
>
> I'm currently practicing for CCIE SP with Dynamips but I'm running into
> a problem. I have saved my configurations with the 'copy run start'
> command in the dynagen console. I can see that the configurations have
> been saved to my .net file (configuration = option appeared with some
> base64 code). When I restart dynagen it asks me if I would like to
> import this configuration:
>
> There are saved configurations in your network file.
> Do you wish to import them (Y/N)?
>
> I answer Y ofcourse but my routers are coming up with their initial configs.
>
> Any idea on how to retrieve my config?
>
> Thanks!

Blogs and organic groups at http://www.ccie.net
Received on Sun Jun 07 2009 - 19:25:52 ART