Re: rsvp not working?

Although it has been quite some time back (at least several weeks), I
specifically remember this task and hitting a snag with it. Seems to
me that I had this very issue (or one very similar to it). Fix
action? Reboot everything. I'm quite frankly surprised at just how
often that occurs in the SP track.

I realize this is a very late response but I'm trying to hit some
highlights out of a huge list backlog while catching a few flights
today...

On May 14, 2009, at 1:12 , ricky ong wrote:

> Hi experts.. Sorry this might just be another dump question.. I am
> working on IEWB SP workbook lab 1 Question 4.4, which requires one
> to create
> some TE tunnel. I am following the solution guide.. the tunnel is not
> coming up... aft some isolation i realized that rsvp is not sending
> anything
> though out the cloud. See the below command output:
>
> Rack1R4# sh ip rsvp cou
> Rack1R4# sh ip rsvp counters
> Serial1/0.1 Recv Xmit
> Recv Xmit
> Path 0 0 Resv 0
> 0
> PathError 0 0 ResvError 0
> 0
> PathTear 0 0 ResvTear 0
> 0
> ResvConf 0 0 RTearConf 0
> 0
> Ack 0 0 Srefresh 0
> 0
> IntegrityChalle 0 0 IntegrityRespon 0
> 0
> DSBM_WILLING 0 0 I_AM_DSBM 0
> 0
> Unknown 0 0 Errors 0
> 0
> Non RSVP i/f's Recv Xmit
> Recv Xmit
> Path 0 0 Resv 0
> 0
> PathError 0 0 ResvError 0
> 0
> PathTear 0 0 ResvTear 0
> 0
> ResvConf 0 0 RTearConf 0
> 0
> Ack 0 0 Srefresh 0
> 0
> IntegrityChalle 0 0 IntegrityRespon 0
> 0
> DSBM_WILLING 0 0 I_AM_DSBM 0
> 0
> Unknown 0 0 Errors 0
> 0
> All Interfaces Recv Xmit
> Recv Xmit
> Path 0 0 Resv 0
> 0
> PathError 0 0 ResvError 0
> 0
> PathTear 0 0 ResvTear 0
> 0
> ResvConf 0 0 RTearConf 0
> 0
> Ack 0 0 Srefresh 0
> 0
> IntegrityChalle 0 0 IntegrityRespon 0
> 0
> DSBM_WILLING 0 0 I_AM_DSBM 0
> 0
> Unknown 0 0 Errors 0
> 0
> Rack1R4#sh ip rsvp int
> interface allocated i/f max flow max sub max
> Se1/0.1 0 33750K 33750K 0
>
> hostname Rack1R4
> !
>
> !
> !
> ip cef
> !
> !
> mpls traffic-eng tunnels
> !
> !
> !
>
> !
> interface Loopback0
> ip address 131.1.4.4 255.255.255.255
> !
> interface Tunnel0
> ip unnumbered Loopback0
> tunnel destination 131.1.6.6
> tunnel mode mpls traffic-eng
> tunnel mpls traffic-eng path-option 1 explicit name exp_r4->r6
> tunnel mpls traffic-eng path-option 100 dynamic
> no routing dynamic
> !
>
> !
> interface Serial1/0
> bandwidth 45000
> no ip address
> encapsulation frame-relay
> serial restart-delay 0
> no frame-relay inverse-arp
> !
> interface Serial1/0.1 point-to-point
> bandwidth 45000
> ip address 131.1.34.4 255.255.255.0
> mpls traffic-eng tunnels
> frame-relay interface-dlci 403
> ip rsvp bandwidth
> ip rsvp resource-provider none
> !
>
> !
> router ospf 1
> mpls traffic-eng router-id Loopback0
> mpls traffic-eng area 0
> log-adjacency-changes
> passive-interface Loopback0
> network 131.1.4.4 0.0.0.0 area 0
> network 131.1.34.4 0.0.0.0 area 0!
>
> !
> ip explicit-path name exp_r4->r6 enable
> next-address 131.1.34.3
> next-address 131.1.13.1
> next-address 131.1.12.2
> next-address 131.1.26.6
> next-address 131.1.6.6
>
> I don't have anything for "debug ip rsvp signaling" either.. just
> wondering if there is anything i need to do to "turn-on" rsvp?
> Isn't it
> enough to just use the "ip rsvp bandwidth" under the interface?
>
> Thanks
> Ricky
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 01 2009 - 17:20:02 ART