Re: MPLS Query.

Hi,

Thanks, very good link,i think it will help me much.

Thanks

On Mon, Jun 1, 2009 at 2:11 PM, Splinter <splinter330_at_gmail.com> wrote:

> Mike & Adam,
>
> OK i see that his servers are located in your Data centre right?
>
> I would say route leaking. leak the servers ip range into the clients vrf
> routing table.
>
> here is a good example:
>
>
> http://www.cisco.com/en/US/tech/tk436/tk832/technologies_configuration_example09186a0080231a3e.shtml
>
> HTH
>
> Splinter
>
>
> On Mon, Jun 1, 2009 at 11:29 AM, mike arnold <haynessmith70_at_gmail.com>wrote:
>
>> Hi adam ,
>>
>> U too also in the same boat.I think the requirement is matching,
>>
>> Splinter can u reply or any confusion.
>>
>> Thanks,
>> Mike
>>
>> On Mon, Jun 1, 2009 at 12:25 PM, adam gibs <adamgibs7_at_gmail.com> wrote:
>>
>>> Hi Splinter,
>>>
>>> Each customer is coming with different RD but the monitoring software is
>>> monitoring my internal devices which are not in any VRF they are in global
>>> routing table.monitoring software has been ordered for internal corporate
>>> use but as the customer requirement is to monitor his devices so v r
>>> planning that v will put his devices in our internal monitoring software
>>> which is not in any vrf,
>>>
>>>
>>> For example am sitting in ISP and am managing my all PE routers and P
>>> routers and also my own servers of corporate by this monitoring software and
>>> i also want to include customers devices in this monitoring software.
>>>
>>> Thanks
>>>
>>> On Mon, Jun 1, 2009 at 11:37 AM, Splinter <splinter330_at_gmail.com>wrote:
>>>
>>>> Hi,
>>>>
>>>> has each site been created with a different RD?
>>>>
>>>> if yes then import all the other RD into the site where the clients
>>>> monitoring server is located.
>>>>
>>>> HTH
>>>>
>>>> Splinter
>>>>
>>>> On Mon, Jun 1, 2009 at 7:34 AM, mike arnold <haynessmith70_at_gmail.com>
>>>> wrote:
>>>>
>>>> > Hi Experts,
>>>> >
>>>> > Am managing MPLS (ISP) network,the inhouse located servers and
>>>> network
>>>> > devices (PE,P,PE) for coporate users are reacheable to each other and
>>>> they
>>>> > are monitered by 1 of the monitoring software,One of the customer
>>>> wants to
>>>> > monitor his devices by us. How i can achieve this ??? because my
>>>> internal
>>>> > devices and monitoring software is in global routing table but the
>>>> customer
>>>> > is assigned to one of the VRF.
>>>> >
>>>> > Thanks,
>>>> >
>>>> >
>>>> > Blogs and organic groups at http://www.ccie.net
>>>> >
>>>> >
>>>> _______________________________________________________________________
>>>> > Subscription information may be found at:
>>>> > http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 01 2009 - 15:00:40 ART