When you issue the "show standby" command, you can tell which version
your running by looking at the first line of output. With version 1, it
doesn't say, but with version 2, it clearly does say. I labbed it up and
this is what it shows:
R1#show standby
FastEthernet0/0 - Group 1 <<<<< nothing here
State is Active
5 state changes, last state change 00:00:19
Virtual IP address is 192.168.1.254
Active virtual MAC address is 0000.0c07.ac01
Local virtual MAC address is 0000.0c07.ac01 (v1 default) <<<< this
also tells you which version
Hello time 3 sec, hold time 10 sec
Next hello sent in 1.904 secs
Preemption disabled
Active router is local
Standby router is 192.168.1.2, priority 105 (expires in 9.860 sec)
Priority 110 (configured 110)
IP redundancy name is "hsrp-Fa0/0-1" (default)
R1#
R2#show standby
FastEthernet0/0 - Group 1 (version 2) <<<<<< version noted here
State is Standby
4 state changes, last state change 00:00:00
Virtual IP address is 192.168.1.254
Active virtual MAC address is 0000.0c9f.f001
Local virtual MAC address is 0000.0c9f.f001 (v2 default) <<<<< this
also tells you which version
Hello time 3 sec, hold time 10 sec
Next hello sent in 2.232 secs
Preemption disabled
Active router is 192.168.1.1, priority 110 (expires in 8.324 sec)
Standby router is local
Priority 105 (configured 105)
IP redundancy name is "hsrp-Fa0/0-1" (default)
R2#
HTH,
Chuck
-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Rsharma
Sent: Saturday, May 30, 2009 2:21 PM
To: Cisco certification
Subject: HSRP Ver 1 and Ver 2
Hello All,
Just curious to know about ...how can we verify about current HSRP
version
running on routers.
R1#*show standby*
Ethernet1 - Group 1
Local state is *Active, priority 105*, may preempt
Hellotime 3 sec, holdtime 10 sec
Next hello sent in 0.338
* *Virtual IP address is 192.168.21.10 configured
Active router is local
Standby router is 192.168.21.2 expires in 8.280
*Virtual mac address is 0000.0c07.ac01
>>>>>>>>>>>>> Apart from this output .Is there any other idea to
confirm abt HSRP Version ????*
13 state changes, last state change 00:46:10
IP redundancy name is "hsrp-Et0-1"(default)
Priority tracking 1 interface, 1 up:
Interface Decrement State
Serial0 10 Up
* Rsharma*
Blogs and organic groups at http://www.ccie.net
Received on Sat May 30 2009 - 18:13:40 ART
This archive was generated by hypermail 2.2.0 : Mon Jun 01 2009 - 07:04:43 ART