Re: Telnet Control

Hi all,

sorry did not elaborate on the question,

it should have said that telnet needs to be sourced from the loopback
interfaces only.

NBAR will drop all telnet traffic and would not work in this regards.

I think that you can only use MQC with acls then.

Splinter

On Wed, May 27, 2009 at 7:58 PM, Joe Astorino <jastorino_at_ipexpert.com>wrote:

> Well I certainly agree with Ryan's solution too!
>
> Regards,
>
> Joe Astorino
> CCIE #24347 (R&S)
> Sr. Support Engineer  IPexpert, Inc.
> URL: http://www.IPexpert.com
>
> ------------------------------
> *From*: Splinter
> *Date*: Wed, 27 May 2009 19:54:39 +0200
> *To*: <jastorino_at_ipexpert.com>
> *Subject*: Re: Telnet Control
> Sorry Joe,
>
> did not mention that you must only allow from certain interfaces.
>
> Splinter
>
> On Wed, May 27, 2009 at 7:51 PM, Joe Astorino
<jastorino_at_ipexpert.com>wrote:
>
>> Hmmmmmm "no transport input telnet" for NO connections.
>>
>>
>> ------Original Message------
>> From: Splinter
>> Sender: nobody_at_groupstudy.com
>> To: CCIE Groupstudy
>> ReplyTo: Splinter
>> Subject: Telnet Control
>> Sent: May 27, 2009 1:32 PM
>>
>> Hi,
>>
>> is there any other way to configure telnet access control without using
>> acls.
>>
>>
>> i know it can be done with MQC but then you will be using acls to
>> accomplish
>> this task.
>>
>> any feedback would be great.
>>
>> Splinter
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Regards,
>>
>> Joe Astorino
>> CCIE #24347 (R&S)
>> Sr. Support Engineer  IPexpert, Inc.
>> URL: http://www.IPexpert.com

Blogs and organic groups at http://www.ccie.net
Received on Wed May 27 2009 - 20:05:40 ART