Re: OSPF neighbor on non-broadcast OSPF network type

No problem joe ...I may be fat fingered but I was sure when I saw it and
just moved on to different topology as it was not the concern during that
time and meantime posted the question to u all .

Thanks

Regards
Anantha Subramanian Natarajan

On Sun, May 24, 2009 at 6:11 PM, Joe Astorino <jastorino_at_ipexpert.com>wrote:

> I'd really have to see the configurations to believe that one : ) No
> offense, but non-broadcast on both sides with no neighbor statement just
> simply won't work as far as I know.
>
>
> Regards,
>
> Joe Astorino
> CCIE #24347 (R&S)
> Sr. Support Engineer  IPexpert, Inc.
> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>
>
>
> ------------------------------
> *From:* Anantha Subramanian Natarajan [mailto:
> anantha.natarajan_at_gravitant.com]
> *Sent:* Sunday, May 24, 2009 7:08 PM
> *To:* Joe Astorino; Cisco certification
> *Subject:* Re: OSPF neighbor on non-broadcast OSPF network type
>
> Hi Joe,
>
> Both sides were non-broadcast and later me changed the topology to
> broadcast on both sides to do some other scenario..I am trying to erase the
> config and try to recreate the same topology to see whether it comes back .
>
> Thanks
>
> Regards
> Anantha Subramanian Natarajan
>
> On Sun, May 24, 2009 at 6:05 PM, Joe Astorino
<jastorino_at_ipexpert.com>wrote:
>
>> Generally you do need it, but without further information it is really
>> difficult for us to tell you exactly. We need to know the network type on
>> the other side as well.
>>
>>
>> Regards,
>>
>> Joe Astorino
>> CCIE #24347 (R&S)
>> Sr. Support Engineer - IPexpert, Inc.
>> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Anantha Subramanian Natarajan
>> Sent: Sunday, May 24, 2009 2:25 PM
>> To: Cisco certification
>> Subject: OSPF neighbor on non-broadcast OSPF network type
>>
>> Hi All,
>>
>> I ran OSPF on an non-broadcast OSPF network type between R1 and R2 and
>> saw the neighbor came up without configuring explicitly "neighbor "
>> command
>> under the OSPF process.I was assuming the neighbor command is
>> required.Kindly let me know on this and also if missed some basic on it.
>>
>> Thanks
>>
>> Regards
>> Anantha Subramanian Natarajan
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.339 / Virus Database: 270.12.31/2116 - Release Date: 05/24/09
>> 07:09:00
>>
>>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.339 / Virus Database: 270.12.31/2116 - Release Date: 05/24/09
> 07:09:00

Blogs and organic groups at http://www.ccie.net
Received on Sun May 24 2009 - 18:14:19 ART