Re: OSPF neighbor on non-broadcast OSPF network type

Hi Divin,

  Both sides were non-broadcast

Thanks

Regards
Anantha Subramanian Natarajan

On Sun, May 24, 2009 at 5:08 PM, Divin Mathew John <divinjohn_at_gmail.com>wrote:

> Broadcast and NBMA there wont be any nieghbourship formed due to timer
> mismatch by default.. you could tweak the timers and get it working.!
> Thanking You
>
> Yours Sincerely
>
> Divin Mathew John
> divinjohn_at_gmail.com
> divin_at_dide3d.com
> http://www.dide3d.com
> +91 9945430983
> +91 9846697191
> +974 5008916
> PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> Sent from Bangalore, KA, India
>
> On Mon, May 25, 2009 at 3:38 AM, Santiago Enciso <
> senciso_at_infocenter.com.py> wrote:
>
>> Did the adjacency reached the full state?
>> Were both sides non-broadcast? BCAST and NBCAST are compatible network
>> types.
>>
>> Santiago E
>>
>> -----Mensaje original-----
>> De: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] En nombre de
>> Anantha Subramanian Natarajan
>> Enviado el: Domingo, 24 de Mayo de 2009 15:09
>> Para: hanan; Cisco certification
>> Asunto: Re: OSPF neighbor on non-broadcast OSPF network type
>>
>> Hi Hanan,
>>
>> Thanks and will try that.
>>
>> Regards
>> Anantha Subramanian Natarajan
>>
>> On Sun, May 24, 2009 at 1:47 PM, hanan <nouran_at_skynet.be> wrote:
>>
>> > Hi
>> >
>> > Its happen to me once and i didn't understand why but if you save
>> > configuration and reload the routers you will not have any neighbour
>> > anymore
>> > unless you put neighbour command.
>> >
>> >
>> > Regards
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> > Anantha Subramanian Natarajan
>> > Sent: Sunday, May 24, 2009 8:25 PM
>> > To: Cisco certification
>> > Subject: OSPF neighbor on non-broadcast OSPF network type
>> >
>> > Hi All,
>> >
>> > I ran OSPF on an non-broadcast OSPF network type between R1 and R2 and
>> > saw the neighbor came up without configuring explicitly "neighbor "
>> command
>> > under the OSPF process.I was assuming the neighbor command is
>> > required.Kindly let me know on this and also if missed some basic on it.
>> >
>> > Thanks
>> >
>> > Regards
>> > Anantha Subramanian Natarajan
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun May 24 2009 - 17:57:00 ART