Re: Cisco ME-6524

I just had a quick nap and for the benifit of everyone here is the solution

1. ME3400 is not normal switch like traditional 3560, 65xx or 29xx what we
do in CCIE stuffs and in enterprise network.
2. The switch port has 2modes - UNI and NNI
Uni is for user
NNI is network side

If you configure port type NNI then layer 2 broadcasts are allowed.
everything works like normal switch.
config t
int gig 0/3
port-type nni

if you configure port as a UNI then nothing is allowed to be passed, hence I
coullnt see STP running and show arp output.

the real kink was with vlan type

config t
int vlan 110
UNI-type community

by default vlan type is non community.

When it is set as a community it started like NNI port and everything
started working.

It's a secure switch for service provider.

-frog

On Thu, May 21, 2009 at 8:01 PM, Radioactive Frog <pbhatkoti_at_gmail.com>wrote:

> Never mind.........please ignore my this email.
> I have figured out all kinks of it after wasting 6 hours on it.
>
>
>
> On Thu, May 21, 2009 at 5:06 PM, Radioactive Frog <pbhatkoti_at_gmail.com>wrote:
>
>> Can someone share their ME3400 or 6524 working config?
>>
>>
>> On Thu, May 21, 2009 at 4:30 PM, Sergei Udovenko <udovenko_at_gmail.com>wrote:
>>
>>> HI GS!
>>> I desperately trying to find any guide about what this command does on
>>> cisco
>>> 6524-me switch . The command is *platform hardware acl tcam dynamic
>>> localize
>>> *
>>> *
>>> *
>>> *Any link to the command explanation will be good.*
>>> *
>>> *
>>> *Unfortunately I didn't find anything on Cisco site :) or I didn't looked
>>> well :(*
>>> *
>>> *
>>> *
>>> *--------------------
>>> Best regards,
>>> Sergei
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu May 21 2009 - 23:54:09 ART