Re: EEM not working

Malla,

Is this a real rack or in dynamips? I seem to always face this issue with
dynamips.

On Wed, May 20, 2009 at 11:37 AM, Malla, Girish <Girish.Malla_at_amd.com>wrote:

> Experts,
>
>
>
> I am facing problem with below configuration. Anything wrong in this
> configuration? The EEM is not able to match this syslog message. Does
> the EEM match only specific syslog messages?
>
>
>
>
>
> event manager applet test
>
> event syslog pattern "%DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor
> 192.168.2.1 (Serial1/0) is down: holding time expired"
>
> action 1.0 cli command "enable"
>
> action 1.1 cli command "configure terminal"
>
> action 1.2 cli command "no ip route 192.168.1.0 255.255.255.0
> fastEthernet 0/0 192.168.3.2"
>
> action 1.3 syslog msg "Static route removed"
>
>
>
> below are the output of "debug event manager all"
>
>
>
> *Mar 1 03:56:34.431: fh_fd_syslog_event_match: num_matches = 0
>
> *Mar 1 03:56:34.431: fh_fd_data_syslog: num_matches = 0
>
>
>
> Regards,
>
> Girish
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Bryan Bartik
CCIE #23707 (R&S), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net