RE: RMON Error

Do this, to get the specific interface mib

Test#sh snmp mib ifmib ifindex
Async0/0/0: Ifindex = 5
FastEthernet0/0: Ifindex = 1
Loopback0: Ifindex = 7
Null0: Ifindex = 4
Serial0/0/0: Ifindex = 3
Loopback1: Ifindex = 8
FastEthernet0/1: Ifindex = 2
Serial0/0/0.101: Ifindex = 6

Then this

rmon alarm 1 ifEntry.3 (<------ from step 1, ie serial0/0) 30 absolute rising threshold 40 1 falling-threshold 0
2

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Splinter
Sent: Monday, May 18, 2009 3:58 PM
To: ccielab_at_groupstudy.com
Subject: RMON Error

Hello,

when I configure my rmon alarm i get the following error:

Unknown object: ifOutQlen

where am i going wrong?

here is my config:

snmp-server ifindex persist
snmp-server community public
snmp-server enable traps syslog

rmon event 1 log trap public description "serial 2/0 output queue full"
owner cisco
rmon event 2 log trap public description "serial 2/0 output queue OK" owner
cisco
rmon alarm 1 ifOutQlen 30 absolute rising threshold 40 1 falling-threshold 0
2 <= "this is were i am getting the error"

the sampling MIB vlaue is ifEntry.21

please help failing to get the correct IfEntry.

Splinter

Blogs and organic groups at http://www.ccie.net
Received on Mon May 18 2009 - 16:31:56 ART