Re: rsvp not working?

Hi
Can you please do the "show mpls traffic-eng topology <Router-ID>" on all TE
enabled routers. to make sure all necessury interface enabled for TE

2) issue "show mpls traffic-eng tunnels" from the head end router, and see
why the tunnel is not up

The required config is
-----------------------------

All TE Routers;

config t
mpls traffic-eng tunnels

int fas x/x
bandwidth xx
mpls traffic-eng tunnels
ip rsvp bandwidth

router ospf
mpls traffic-eng router-id Loopback0
 mpls traffic-eng area 0

Additional config in Tunnel Headend
-----------------------------------------------------
interface Tunnel0
 ip unnumbered Loopback0
 tunnel destination 131.1.6.6
 tunnel mode mpls traffic-eng
 tunnel mpls traffic-eng path-option 1 explicit name exp_r4->r6
 tunnel mpls traffic-eng path-option 100 dynamic
 tunnel mpls traffic-eng bandwidth 5000
tunnel mpls traffic-eng priority 1 1

Regards
Pandi

On Fri, May 15, 2009 at 10:53 PM, Bryan Bartik <bbartik_at_ipexpert.com> wrote:

> Do you have required mpls TE configuration on all intermediate
> routers/interface (and ospf) between the source and destination?
>
> On Fri, May 15, 2009 at 2:45 AM, ricky ong <rickyong2009_at_gmail.com> wrote:
>
> > Hi, Just want to clear some concept issue here.. once i put "ip rsvp
> > bandwidth" command under the interface, i should start to see some thing
> on
> > rsvp debug? If two direct connected router both have "ip rsvp band"
> > configured under their interface then i should see then as "rsvp neighbor
> > using "show ip rsvp neighbor" command?
> > I am still quite stuck at the RSVP problem now.. seems that opaque LSA
> > is sending, with the "mpls trafic-eng router-id loopback0" and "mpls
> > traffic-eng area 0" under OSPF..
> > "mpls traffic-eng tunnel" and been configured on all routers globally
> and
> > interface.. i dun think "mpls ip" is relevant to this issue since the TE
> > label should be exchanged by RSVP, nevertheless, it is configured on all
> > the
> > router globally and interface.. but still.. i don't see any RSVP message
> on
> > any of the routers.. can someone give me a clue? Thanks!
> >
> > Best Regards,
> > Ricky
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Bryan Bartik
> CCIE #23707 (R&S), CCNP
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon May 18 2009 - 16:57:26 ART