Re: IP ARP rep filtered src wrong cable ??

That did it !!!!!! - weird ?

My IOS version is below. Thanks Dale!

RSRack1SW2#sho version
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(2
E2, RELEASE SOFTWARE (fc1)

On Sat, May 16, 2009 at 9:03 PM, Dale Shaw <dale.shaw_at_gmail.com> wrote:

> Weird. Try the 'vlan dot1q tag native' global command on the switch,
> without changing anything else, and see if that makes it work.
>
> What code are you running on the router and what platform?
>
> Is there any other aspect of your topology that could be creating
> problems? Is VLAN16 definitely permitted on the trunk to your router?
> Does the router 'see' the ARP requests from the switch and if so, is
> it generating that same 'wrong cable' event?
>
> cheers
> Dale
>
> On Sun, May 17, 2009 at 12:56 PM, Michael Jones <majonestx_at_gmail.com>
> wrote:
> > Yeah,
> >
> > Unfortunately, when rebuilding the interface i left it off- however, once
> > re- added the same issue exists.
> >
> > Whats even weirder is when I create a layer 3 interface for vlan 16 on
> the
> > switch the router is trunking down to-
> > I still cant get a icmp reply!

Blogs and organic groups at http://www.ccie.net
Received on Sat May 16 2009 - 21:13:22 ART