Re: Default route in switch in a dual-ASA scenario....

Cisco Nuts wrote:
> Hi:
>
> If we have 2 ASA's configured for failover connected to 2 switches, is there a
> reason why the default route in both switches point to the physical address of
> the primary asa.
>
> If the primary asa to switch ip's are .1 and .2 and secondary asa to switch #2
> ip's are .3 and .4 and the hsrp active is .100, shouldn't the default route in
> both switches point to the .100?
>
    As far as I know, there is no support for HSRP on the ASA.
> What is different in asa compared to regular routers?
>
    On two ASAs configured for failover, when the primary fails, the
secondary unit will assume the primary's IP address. So your
configuration is correct.

-- 
Bogdan Sass
CCAI,CCSP,JNCIA-ER,CCIE #22221 (RS)
Information Systems Security Professional
"Curiosity was framed - ignorance killed the cat"
Blogs and organic groups at http://www.ccie.net