RE: CCIE R&S V4 ...Which IOS with dynamips

Should go for T images, mainline is not anymore in the v4.0 blueprint.
My home rack is 12.3 (2621 w/ 64mb ram) I cant run 12.4 main line, and not
even talk about 12.4T
 
 
 
  _____

De: Pavel Bykov [mailto:slidersv_at_gmail.com]
Enviado el: Martes, 12 de Mayo de 2009 15:53
Para: Mohamed El Henawy
CC: Santiago Enciso; Cisco certification
Asunto: Re: CCIE R&S V4 ...Which IOS with dynamips
 
Uhh... The one that Santiago linked.

Dynamips emulates routers, so anything that works on routers will work on
dynamips.
Just get the latest 12.4 mainline for the router you are emulating.
On Tue, May 12, 2009 at 9:45 PM, Mohamed El Henawy <m.henawy_at_link.net>
wrote:
Thanks , I was looking for what IOS should work fine with dynamips...if
anyone already tried..

----- Original Message ----- From: "Santiago Enciso"
<senciso_at_infocenter.com.py>
To: "'Mohamed El Henawy'" <m.henawy_at_link.net>; "'Cisco certification'"
<ccielab_at_groupstudy.com>
Sent: Tuesday, May 12, 2009 9:55 PM
Subject: RE: CCIE R&S V4 ...Which IOS with dynamips

https://cisco.hosted.jivesoftware.com/docs/DOC-4602

-----Mensaje original-----
De: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] En nombre de
Mohamed El Henawy
Enviado el: Martes, 12 de Mayo de 2009 14:43
Para: Cisco certification
Asunto: CCIE R&S V4 ...Which IOS with dynamips

Hello Group ,

can anyone advise which IOS I should be using with dynamips now for the new
blueprint ?

Regards ,

Blogs and organic groups at http://www.ccie.net
Received on Tue May 12 2009 - 17:10:49 ART