Re: Please confirm (conf#247c9a7703e003a787c49083ff1508da)

You probably have an EIGRP authentication issue.

.aero

On May 8, 2009, at 9:12 AM, kaniyath minha <minha.kaniyath_at_gmail.com>
wrote:

> On Wed, May 6, 2009 at 10:18 AM, Cisco certification <ccielab_at_groupstudy.com
>> wrote:
>
>> Hi,
>>
>> You have tried to post to a GroupStudy.com certification mailing
>> list.
>> Because
>> the server does not recognize you as a confirmed poster, you will be
>> required
>> to authenticate that you are using a valid e-mail address and are
>> not a
>> spammer. By confirming this e-mail you certify that you are not
>> sending
>> Unsolicited Bulk Email (UBE).
>>
>> PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS
>> EMAIL
>> YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE
>> POSTED.
>>
>>
>> By confirming this e-mail you also certify the following:
>>
>> 1. The message does NOT break Cisco's Non-Disclosure requirements.
>>
>> 2. The message is NOT designed to advertise a commercial product.
>>
>> 3. You understand all postings become property of GroupStudy.com
>>
>> 4. You have searched the archives prior to posting.
>>
>> 5. The message is NOT inflammatory.
>>
>> 6. The message is NOT a test message.
>>
>> To confirm, simply reply to this message. No editing is
>> necessary. Once
>> confirmed, you will be able to post without additional confirmations.
>>
>>
>> Welcome to GroupStudy.com!
>>
>>
>> First time posters to GroupStudy.com are required to agree to the
>> GroupStudy terms and conditions.
>> Replying to this email, certifies you have read and agree to the
>> GroupStudy
>> posting guidelines and terms and conditions.
>>
>> --- Original Message Follows ---
>>
>> Date: Wed, 6 May 2009 10:18:21 +0300
>> Subject: IEExpert Vol 2 version 4.1 task 4.4
>> From: kaniyath minha <minha.kaniyath_at_gmail.com>
>> To: ccielab_at_groupstudy.com
>>
>> Dear
>>
>>
>> I configured straight forward configuration of EIGRP on R6
>>
>> router eigrp 10
>> network 54.1.2.6 0.0.0.0
>>
>> But i am getting an error on my R6 like
>>
>> *Mar 2 02:18:26.565: IP-EIGRP(Default-IP-Routing-Table:10): Neighbor
>> 54.1.10.254 not on common subnet for Serial0/0.
>>
>> Show ip eigrp neighbor is ok.
>>
>> Please help me to solve this issue.
>>
>>
>> Thanks and Regards
>>
>> Kajaleel
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
 

> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri May 08 2009 - 09:32:04 ART