Re: PPPOE issue

yeah try incereasing the MTU on the switches or make the MTU on the routers 1492
Thanking You

Yours Sincerely

Divin Mathew John
divinjohn_at_gmail.com
divin_at_dide3d.com
http://www.dide3d.com
+91 9945430983
+91 9846697191
+974 5008916
PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
Sent from Bangalore, KA, India

On Fri, May 8, 2009 at 7:02 PM, Dheven <dheven_at_gmail.com> wrote:
> Hi Divin
>
> 1500
>
> On Fri, May 8, 2009 at 3:29 PM, Divin Mathew John <divinjohn_at_gmail.com>
> wrote:
>>
>> MTU on the switches?
>> Thanking You
>>
>> Yours Sincerely
>>
>> Divin Mathew John
>> divinjohn_at_gmail.com
>> divin_at_dide3d.com
>> http://www.dide3d.com
>> +91 9945430983
>> +91 9846697191
>> +974 5008916
>> PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
>>
>>
>>
>> On Fri, May 8, 2009 at 6:55 PM, Dheven <dheven_at_gmail.com> wrote:
>> > Hi GS.
>> >
>> > I am having a problem setting up PPPOE.
>> >
>> > here is my setup:
>> >
>> > R1 --- SW1(fa0/1) ---- SW1(fa0/6) ---- R6
>> >
>> > I have tested this with just using back to back connections and it works
>> > but
>> > when i add the switch to the equation I cannot get this to work.
>> >
>> > any assistance will be greatly appreciated.
>> >
>> > R1:
>> >
>> > vpdn enable
>> >
>> > vpdn-group 1
>> > request-dialin
>> > protocol pppoe
>> >
>> > interface fa0/1
>> > no ip address
>> > pppoe enable group global
>> > pppoe-client dial-pool-number 1
>> >
>> > interface Dialer1
>> > ip address dhcp
>> > encapsulation ppp
>> > dialer pool 1
>> > ppp chap hostname cisco
>> > ppp chap password cisco
>> >
>> > R6:
>> > username cisco password cisco
>> >
>> > vpdn enable
>> >
>> > vpdn-group 1
>> > accept-dialin
>> > protocol pppoe
>> > virtual-template 1
>> >
>> > ip dhcp excluded-address 172.10.16.2 172.10.16.254
>> > ip dhcp pool PPPOE
>> > network 172.10.16.0 255.255.255.0
>> >
>> > interface fa0/1
>> > pppoe enable group global
>> >
>> >
>> > interface virtual-template 1
>> > ip address 172.10.16.6 255.255.255.0
>> > no peer neighbor-route
>> >
>> >
>> > I also tested with adding the "ip address dhcp" under the physical
>> > interface
>> > this works (i get an ip address from the dhcp server) but my vpdn tunnel
>> > does not come up.
>> >
>> >
>> > what am I doing wrong.
>> >
>> >
>> > D
>> > ---
>> > Always forgive your enemies - Nothing annoys them so much.
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>
>
>
> --
> Always forgive your enemies - Nothing annoys them so much.

Blogs and organic groups at http://www.ccie.net
Received on Fri May 08 2009 - 19:03:58 ART