RE: Switch Int Shows Up When Router Int Shut

Joe,
      Can you more the switch side connection to another port? If so, does
it do the same thing? Is there anything odd on the switch to nail the port
up? generic switch port config?

Charles

                                                                                                                                 
  From: "Joe Astorino" <joe_astorino_at_comcast.net>
                                                                                                                                 
  To:
                                                                                                                                 
  Cc: <ccielab_at_groupstudy.com>
                                                                                                                                 
  Date: 05/07/2009 01:43 PM
                                                                                                                                 
  Subject: RE: Switch Int Shows Up When Router Int Shut
                                                                                                                                 

 This is really freaking me out now...it's happening across multiple of my
3550's going to multiple routers of different platforms. Weird!

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Joe
Astorino
Sent: Thursday, May 07, 2009 2:31 PM
Cc: ccielab_at_groupstudy.com
Subject: RE: Switch Int Shows Up When Router Int Shut

No, 3550 switch going to 2600 routers ethernet interfaces. reboot both
devices, no errors on either

  _____

From: Darby Weaver [mailto:ccie.weaver_at_gmail.com]
Sent: Thursday, May 07, 2009 2:27 PM
To: Joe Astorino
Cc: ccielab_at_groupstudy.com
Subject: Re: Switch Int Shows Up When Router Int Shut

I've seen this and it seems like it happened on failing equipment. I guess
you could change the IOS just in case.

But it might be the hardware.

Is this a 4006 by chance?

On Thu, May 7, 2009 at 2:21 PM, Joe Astorino <joe_astorino_at_comcast.net>
wrote:

Thanks Ron, but this is live equipment...and is happening on several
devices! 2600s going back to 3550's

"He not busy being born is busy dying" -- Dylan

-----Original Message-----
From: ron.wilkerson_at_gmail.com [mailto:ron.wilkerson_at_gmail.com]
Sent: Thursday, May 07, 2009 2:18 PM
To: Joe Astorino; ccielab_at_groupstudy.com
Subject: Re: Switch Int Shows Up When Router Int Shut

Bad cable...
If dynamips, reboot!
------Original Message------
From: Joe Astorino
Sender: nobody_at_groupstudy.com
To: ccielab_at_groupstudy.com
ReplyTo: Joe Astorino
Sent: May 7, 2009 14:13
Subject: Switch Int Shows Up When Router Int Shut

So, am I losing my mind or what?! Anybody else experience this? I have R1
e0/0 connected to Cat1 fa0/1. On R1 I have shutdown the interface. I have
verified it shows as admin down a million times. On the switch side the
port still shows as "connected" and has a link light. Yes, I'm sure it is
the right device. WTF?!

"He not busy being born is busy dying" -- Dylan

Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
Received on Thu May 07 2009 - 13:47:51 ART