Re: Best image for ccie4.0 for use with dynamips!!

From: <Charles.Henson_at_regions.com>
Date: Thu, 7 May 2009 08:40:30 -0500

Internetwork Expert Vol2 Dynamips .net Router 1 - - -

Be sure and uncompress the binary before loading. Much faster.

######################################################################################
Connected to Dynamips VM "R1" (ID 17, type c3600) - Console port

R1(config)#do sho ver
Cisco IOS Software, 3600 Software (C3640-JK9S-M), Version 12.4(13a),
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 06-Mar-07 20:25 by prod_rel_team

ROM: ROMMON Emulation Microcode
ROM: 3600 Software (C3640-JK9S-M), Version 12.4(13a), RELEASE SOFTWARE
(fc1)

R1 uptime is 19 hours, 9 minutes
System returned to ROM by unknown reload cause - suspect
boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
System image file is "tftp://255.255.255.255/unknown"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export_at_cisco.com.

Cisco 3640 (R4700) processor (revision 0xFF) with 247808K/12288K bytes of
memory.
Processor board ID 00000000
R4700 CPU at 100MHz, Implementation 33, Rev 1.2
1 FastEthernet interface
4 Serial interfaces
DRAM configuration is 64 bits wide with parity enabled.
125K bytes of NVRAM.
8192K bytes of processor board System flash (Read/Write)
0K bytes of PCMCIA Slot0 flash (Read/Write)

Configuration register is 0x2142

R1(config)#
#############################################################################

Charles

                                                                                                                                 
  From: Andy Hogard <andyhogard_at_gmail.com>
                                                                                                                                 
  To: Divin Mathew John <divinjohn_at_gmail.com>
                                                                                                                                 
  Cc: Cisco certification <ccielab_at_groupstudy.com>
                                                                                                                                 
  Date: 05/07/2009 03:18 AM
                                                                                                                                 
  Subject: Re: Best image for ccie4.0 for use with dynamips!!
                                                                                                                                 

Hi, thanks for the quick response!!

Can you give me the exact name of the image you are using for a 3600
platform please.

On Thu, May 7, 2009 at 1:38 PM, Divin Mathew John
<divinjohn_at_gmail.com>wrote:

> 12.4 Advanced Enterprise on 7200 and 3600 or i think 12.4 ADVanced IP
> services also has MPLS
> Thanking You
>
> Yours Sincerely
>
> Divin Mathew John
> divinjohn_at_gmail.com
> divin_at_dide3d.com
> http://www.dide3d.com
> +91 9945430983
> +91 9846697191
> +974 5008916
> PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> Sent from Bangalore, KA, India
>
>
> On Thu, May 7, 2009 at 1:32 PM, Andy Hogard <andyhogard_at_gmail.com> wrote:
> > Hi,
> >
> > I wanted to know what would be the best possible image to be used with
> > dynamips ..the one which can be easy on the hardware underneath!!
> >
> >
> > Upto now, dynamips can emulate the 1700s, 2600s, 3600s, 3700s and
7200s.
> >
> >
> > Greets!
> > Andy H.
> >
> > --
> > My Blog URL: http://ccieno.blogspot.com/
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>

--
My Blog URL: http://ccieno.blogspot.com/
Blogs and organic groups at http://www.ccie.net
Received on Thu May 07 2009 - 08:40:30 ART

This archive was generated by hypermail 2.2.0 : Mon Jun 01 2009 - 07:04:42 ART