IEExpert Vol 2 version 4.1 task 4.11

Dear

While redistributing RIP into OSPF and vise versa on Rack1SW1, why the
distance 109 command is used under router rip command.

There is no explanation on SG and question is not specifying anything for
changing this.

Below shows the question and answer which is showed in SG
*
Question *

4.11. IGP Redistribution
 Redistribute between RIP and OSPF on SW1.
 Redistribute between OSPF and EIGRP on R2, R3, and R4.
 Ensure that full reachability is maintained throughout the IGP domain
when the Frame Relay circuit between R3 and R5 is down.

*Answer in SG*

Task 4.11
SW1:
router ospf 1
redistribute rip subnets
network 132.1.17.7 0.0.0.0 area 17
!
router rip
redistribute ospf 1 metric 1
distance 109 *(Why this command required in this particular scenario)

*Thanks and Regards*
*Abdul Jaleel Kaniyath*
*

Blogs and organic groups at http://www.ccie.net
Received on Wed May 06 2009 - 14:16:34 ART