Re: pls help, easy ospf question

what do i do now ?

R1(config-subif)#frame-relay map ip 131.1.12.2 16
 Only frame-relay interface-dlci command should beused on point-to-point
interfaces not frame-relay map

On Fri, May 1, 2009 at 10:41 AM, Baik, Chan <Chan.Baik_at_viacom.com> wrote:

> You need to configure something like this:
>
> interface serial s0/0
> encap frame-relay
>
> interface serial s0/0.12
> frame-relay map ip <ip addr of other side> <dlci>
>
> ------------------------------
> *From:* belletjetrekken [mailto:belletjetrekken_at_gmail.com]
> *Sent:* Friday, May 01, 2009 8:38 AM
> *To:* Baik, Chan
>
> *Subject:* Re: pls help, easy ospf question
>
> frame-relay
>
> On Fri, May 1, 2009 at 10:31 AM, Baik, Chan <Chan.Baik_at_viacom.com> wrote:
>
>> Are you supposed to use frame-relay encapsulation on serial 0/0 or hdlc?
>>
>> ------------------------------
>> *From:* belletjetrekken [mailto:belletjetrekken_at_gmail.com]
>> *Sent:* Friday, May 01, 2009 8:28 AM
>> *To:* Ryan West
>> *Cc:* Abraham, Tharak; Baik, Chan; Cisco certification
>>
>> *Subject:* Re: pls help, easy ospf question
>>
>> here is some more layout info attached
>>
>> On Fri, May 1, 2009 at 10:23 AM, Ryan West <rwest_at_zyedge.com> wrote:
>>
>>> Can you ping 12.1, I dont see any hellos in that direction. Also,
>>> can turn off the other debugs once you can ping and deb ip os adj ?
>>>
>>>
>>>
>>> -ryan
>>>
>>>
>>>
>>> *From:* belletjetrekken [mailto:belletjetrekken_at_gmail.com]
>>> *Sent:* Friday, May 01, 2009 11:14 AM
>>> *To:* Abraham, Tharak
>>> *Cc:* Ryan West; Baik, Chan; Cisco certification
>>>
>>> *Subject:* Re: pls help, easy ospf question
>>>
>>>
>>>
>>>
>>>
>>> On Fri, May 1, 2009 at 10:08 AM, Abraham, Tharak <
>>> tharakabraham_at_gmail.com> wrote:
>>>
>>> Were the adjacencies formed before turning on authentication?
>>>
>>> Could you disable the authentication and give a shot?
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Fri, May 1, 2009 at 5:03 PM, Ryan West <rwest_at_zyedge.com> wrote:
>>>
>>> Post debugs.
>>>
>>>
>>> -----Original Message-----
>>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>>> belletjetrekken
>>> Sent: Friday, May 01, 2009 10:57 AM
>>> To: Baik, Chan
>>> Cc: Cisco certification
>>> Subject: Re: pls help, easy ospf question
>>>
>>> i just turned enabled the serial interfaces..but still the routes are not
>>> showing up
>>>
>>> On Fri, May 1, 2009 at 9:49 AM, Baik, Chan <Chan.Baik_at_viacom.com> wrote:
>>>
>>> > It looks like your serial interfaces are shut down.
>>> >
>>> > -----Original Message-----
>>> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
>>> Of
>>> > junk mail
>>> > Sent: Friday, May 01, 2009 7:24 AM
>>> > To: Cisco certification
>>> > Subject: pls help, easy ospf question
>>> >
>>> > studying for my r & s, i configured 4 routers for ospf and for some
>>> > reason R1's ospf routes are not showing up in the routing table, can
>>> > somebody help me figure out why the routes are not showing up ? i
>>> > attached sh run's here..
>>> >
>>> > thanks
>>> >
>>> > belletjetrekken
>>> > R1#sh run
>>> > Building configuration...
>>> >
>>> > Current configuration : 1838 bytes
>>> > !
>>> > version 12.4
>>> > service timestamps debug datetime msec
>>> > service timestamps log datetime msec
>>> > no service password-encryption
>>> > !
>>> > hostname R1
>>> > !
>>> > boot-start-marker
>>> > boot-end-marker
>>> > !
>>> > !
>>> > no aaa new-model
>>> > !
>>> > resource policy
>>> > !
>>> > no network-clock-participate slot 1
>>> > no network-clock-participate wic 0
>>> > ip subnet-zero
>>> > ip cef
>>> > !
>>> > !
>>> > !
>>> > !
>>> > no ip domain lookup
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > interface Loopback0
>>> > ip address 1.1.1.1 255.0.0.0
>>> > !
>>> > interface FastEthernet0/0
>>> > no ip address
>>> > duplex auto
>>> > speed auto
>>> > !
>>> > interface Serial0/0
>>> > no ip address
>>> > no dce-terminal-timing-enable
>>> > !
>>> > interface Serial0/0.12
>>> > ip address 131.1.12.1 255.255.255.0
>>> > ip ospf message-digest-key 1 md5 Cisco12 !
>>> > interface FastEthernet0/1
>>> > no ip address
>>> > shutdown
>>> > duplex auto
>>> > speed auto
>>> > !
>>> > interface Serial0/1
>>> > no ip address
>>> > shutdown
>>> > no dce-terminal-timing-enable
>>> > !
>>> > router ospf 1
>>> > router-id 1.1.1.1
>>> > log-adjacency-changes
>>> > area 2 authentication message-digest
>>> > network 0.0.0.0 255.255.255.255 area 2
>>> > !
>>> > ip classless
>>> > !
>>> > !
>>> > no ip http server
>>> > no ip http secure-server
>>> > !
>>> > !
>>> > !
>>> > !
>>> > control-plane
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > alias exec siib show ip int br
>>> > alias exec scn show cdp neighbors
>>> > alias exec scnd show cdp neighbors detail alias exec svb show vlan
>>> brief
>>> > alias exec svs show vtp stat alias exec sion show ip ospf nei alias
>>> exec
>>> > siond show ip ospf nei det alias exec siodr show ip ospf database
>>> router
>>> > alias exec sioi show ip ospf int alias exec sen show eigrp nei alias
>>> > exec send show eigrp nei det alias exec ss show spanning-tree alias
>>> exec
>>> > sss show spanning-tree summary alias exec ssd show spanning-tree detail
>>> > alias exec ssm show spanning-tree mst alias exec ssr show spanning-tree
>>> > root alias exec ssb show spanning-tree blockedports alias exec sv show
>>> > version alias exec sir show ip route !
>>> > line con 0
>>> > exec-timeout 0 0
>>> > logging synchronous
>>> > line aux 0
>>> > line vty 0 4
>>> > login
>>> > !
>>> > !
>>> > end
>>> >
>>> > R1#
>>> > R2#sh run
>>> > Building configuration...
>>> >
>>> > Current configuration : 1974 bytes
>>> > !
>>> > version 12.4
>>> > service timestamps debug datetime msec
>>> > service timestamps log datetime msec
>>> > no service password-encryption
>>> > !
>>> > hostname R2
>>> > !
>>> > boot-start-marker
>>> > boot-end-marker
>>> > !
>>> > !
>>> > no aaa new-model
>>> > !
>>> > resource policy
>>> > !
>>> > no network-clock-participate slot 1
>>> > no network-clock-participate wic 0
>>> > ip subnet-zero
>>> > ip cef
>>> > !
>>> > !
>>> > !
>>> > !
>>> > no ip domain lookup
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > interface Loopback0
>>> > ip address 2.2.2.2 255.0.0.0
>>> > !
>>> > interface FastEthernet0/0
>>> > ip address 131.1.23.2 255.255.255.0
>>> > duplex auto
>>> > speed auto
>>> > !
>>> > interface Serial0/0
>>> > no ip address
>>> > no dce-terminal-timing-enable
>>> > !
>>> > interface Serial0/0.21
>>> > ip address 131.1.12.2 255.255.255.0
>>> > ip ospf message-digest-key 1 md5 Cisco12 !
>>> > interface FastEthernet0/1
>>> > no ip address
>>> > shutdown
>>> > duplex auto
>>> > speed auto
>>> > !
>>> > interface Serial0/1
>>> > no ip address
>>> > shutdown
>>> > no dce-terminal-timing-enable
>>> > !
>>> > router ospf 1
>>> > router-id 2.2.2.2
>>> > log-adjacency-changes
>>> > area 1 virtual-link 3.3.3.3
>>> > area 2 authentication message-digest
>>> > network 2.2.2.2 0.0.0.0 area 2
>>> > network 22.2.2.2 0.0.0.0 area 1
>>> > network 131.1.12.2 0.0.0.0 area 2
>>> > network 131.1.23.2 0.0.0.0 area 1
>>> > !
>>> > ip classless
>>> > !
>>> > !
>>> > ip http server
>>> > no ip http secure-server
>>> > !
>>> > !
>>> > !
>>> > !
>>> > control-plane
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > alias exec siib show ip int br
>>> > alias exec scn show cdp neighbors
>>> > alias exec scnd show cdp neighbors detail alias exec svb show vlan
>>> brief
>>> > alias exec svs show vtp stat alias exec sion show ip ospf nei alias
>>> exec
>>> > siond show ip ospf nei det alias exec siodr show ip ospf database
>>> router
>>> > alias exec sioi show ip ospf int alias exec sen show eigrp nei alias
>>> > exec send show eigrp nei det alias exec ss show spanning-tree alias
>>> exec
>>> > sss show spanning-tree summary alias exec ssd show spanning-tree detail
>>> > alias exec ssm show spanning-tree mst alias exec ssr show spanning-tree
>>> > root alias exec ssb show spanning-tree blockedports alias exec sv show
>>> > version alias exec sir show ip route !
>>> > line con 0
>>> > exec-timeout 0 0
>>> > logging synchronous
>>> > line aux 0
>>> > line vty 0 4
>>> > !
>>> > !
>>> > end
>>> >
>>> > R2#
>>> > R3#sh run
>>> > Building configuration...
>>> >
>>> > Current configuration : 1897 bytes
>>> > !
>>> > version 12.4
>>> > service timestamps debug datetime msec
>>> > service timestamps log datetime msec
>>> > no service password-encryption
>>> > !
>>> > hostname R3
>>> > !
>>> > boot-start-marker
>>> > boot-end-marker
>>> > !
>>> > !
>>> > no aaa new-model
>>> > !
>>> > resource policy
>>> > !
>>> > no network-clock-participate slot 1
>>> > no network-clock-participate wic 0
>>> > ip subnet-zero
>>> > ip cef
>>> > !
>>> > !
>>> > !
>>> > !
>>> > no ip domain lookup
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > interface Loopback0
>>> > ip address 3.3.3.3 255.0.0.0
>>> > !
>>> > interface FastEthernet0/0
>>> > ip address 131.1.23.3 255.255.255.0
>>> > duplex auto
>>> > speed auto
>>> > !
>>> > interface Serial0/0
>>> > no ip address
>>> > no dce-terminal-timing-enable
>>> > !
>>> > interface Serial0/0.34
>>> > ip address 131.1.34.3 255.255.255.0
>>> > !
>>> > interface FastEthernet0/1
>>> > no ip address
>>> > shutdown
>>> > duplex auto
>>> > speed auto
>>> > !
>>> > interface Serial0/1
>>> > no ip address
>>> > shutdown
>>> > no dce-terminal-timing-enable
>>> > !
>>> > router ospf 1
>>> > router-id 3.3.3.3
>>> > log-adjacency-changes
>>> > area 1 virtual-link 2.2.2.2
>>> > network 3.3.3.3 0.0.0.0 area 1
>>> > network 33.3.3.3 0.0.0.0 area 0
>>> > network 131.1.23.3 0.0.0.0 area 1
>>> > network 131.1.34.3 0.0.0.0 area 0
>>> > !
>>> > ip classless
>>> > !
>>> > !
>>> > no ip http server
>>> > no ip http secure-server
>>> > !
>>> > !
>>> > !
>>> > !
>>> > control-plane
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > alias exec siib show ip int br
>>> > alias exec scn show cdp neighbors
>>> > alias exec scnd show cdp neighbors detail alias exec svb show vlan
>>> brief
>>> > alias exec svs show vtp stat alias exec sion show ip ospf nei alias
>>> exec
>>> > siond show ip ospf nei det alias exec siodr show ip ospf database
>>> router
>>> > alias exec sioi show ip ospf int alias exec sen show eigrp nei alias
>>> > exec send show eigrp nei det alias exec ss show spanning-tree alias
>>> exec
>>> > sss show spanning-tree summary alias exec ssd show spanning-tree detail
>>> > alias exec ssm show spanning-tree mst alias exec ssr show spanning-tree
>>> > root alias exec ssb show spanning-tree blockedports alias exec sv show
>>> > version alias exec sir show ip route !
>>> > line con 0
>>> > exec-timeout 0 0
>>> > logging synchronous
>>> > line aux 0
>>> > line vty 0 4
>>> > !
>>> > !
>>> > end
>>> >
>>> > R3#
>>> > R4#sh run
>>> > Building configuration...
>>> >
>>> > Current configuration : 1683 bytes
>>> > !
>>> > version 12.4
>>> > service timestamps debug datetime msec
>>> > service timestamps log datetime msec
>>> > no service password-encryption
>>> > !
>>> > hostname R4
>>> > !
>>> > boot-start-marker
>>> > boot-end-marker
>>> > !
>>> > !
>>> > no aaa new-model
>>> > !
>>> > resource policy
>>> > !
>>> > no network-clock-participate slot 1
>>> > no network-clock-participate wic 0
>>> > ip subnet-zero
>>> > ip cef
>>> > !
>>> > !
>>> > !
>>> > !
>>> > no ip domain lookup
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > interface Loopback0
>>> > ip address 4.4.4.4 255.0.0.0
>>> > !
>>> > interface FastEthernet0/0
>>> > no ip address
>>> > shutdown
>>> > duplex auto
>>> > speed auto
>>> > !
>>> > interface Serial0/0
>>> > no ip address
>>> > no dce-terminal-timing-enable
>>> > !
>>> > interface Serial0/0.43
>>> > ip address 131.1.34.3 255.255.255.0
>>> > !
>>> > interface FastEthernet0/1
>>> > no ip address
>>> > shutdown
>>> > duplex auto
>>> > speed auto
>>> > !
>>> > router ospf 1
>>> > router-id 4.4.4.4
>>> > log-adjacency-changes
>>> > network 0.0.0.0 255.255.255.255 area 0
>>> > !
>>> > ip classless
>>> > !
>>> > !
>>> > no ip http server
>>> > no ip http secure-server
>>> > !
>>> > !
>>> > !
>>> > !
>>> > control-plane
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > !
>>> > alias exec siib show ip int br
>>> > alias exec scn show cdp neighbors
>>> > alias exec scnd show cdp neighbors detail alias exec svb show vlan
>>> brief
>>> > alias exec svs show vtp stat alias exec sion show ip ospf nei alias
>>> exec
>>> > siond show ip ospf nei det alias exec siodr show ip ospf database
>>> router
>>> > alias exec sioi show ip ospf int alias exec sen show eigrp nei alias
>>> > exec send show eigrp nei det alias exec ss show spanning-tree alias
>>> exec
>>> > sss show spanning-tree summary alias exec ssd show spanning-tree detail
>>> > alias exec ssm show spanning-tree mst alias exec ssr show spanning-tree
>>> > root alias exec ssb show spanning-tree blockedports alias exec sv show
>>> > version alias exec sir show ip route !
>>> > line con 0
>>> > exec-timeout 0 0
>>> > logging synchronous
>>> > line aux 0
>>> > line vty 0 4
>>> > !
>>> > !
>>> > end
>>> >
>>> > R4#
>>> >
>>> >
>>> > Blogs and organic groups at http://www.ccie.net
>>> >
>>> > _______________________________________________________________________
>>> > Subscription information may be found at:
>>> > http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri May 01 2009 - 15:01:20 ART