i did enter the network statements as network 0.0.0.0 255.255.255.255 area X
so it must've automatically converted.
i attached output of ospf debugging commands here ..
On Fri, May 1, 2009 at 9:37 AM, Sergey Khalavchuk <
ratio+groupstudy_at_invalid.org.ua <ratio%2Bgroupstudy_at_invalid.org.ua>> wrote:
> more correct config is
> network 0.0.0.0 255.255.255.255 area X
> because 255.255.255.255 is expected to be wildcard.
>
> on new IOS(on most IOS), when you enter in router ospf
> network 0.0.0.0 0.0.0.0 area X
> it will be automagicaly converted, and saved in config as
> network 0.0.0.0 255.255.255.255 area X
>
> so no mistake here.
>
> i'd recommend to lear some debug commands, such as debug ip ospf
> packets and debug ip ospf hello. using this command check why
> adjacencies are not forming.
>
> On Fri, May 1, 2009 at 5:30 PM, Cisco Fanatic <ebay_products_at_hotmail.com>
> wrote:
> > On R1 and R4 if you want all the interfaces in a particular area x, then
> you
> > need to configure
> >
> > !
> > router ospf 1
> > network 0.0.0.0 0.0.0.0 area x
> > !
> > Not, this
> > !
> >
> > router ospf 1
> >
> > network 0.0.0.0 255.255.255.255 area x
> >
> > !
> >
> > Or, if you want a specific interface then
> > !
> >
> > router ospf 1
> >
> > network 1.2.3.4 0.0.0.0 area x
> >
> > !
> >
> > HTH,
> > -Yuri
> >> Date: Fri, 1 May 2009 09:23:55 -0500
> >> Subject: pls help, easy ospf question
> >> From: belletjetrekken_at_gmail.com
> >> To: ccielab_at_groupstudy.com
> >>
> >> studying for my r & s, i configured 4 routers for ospf and for some
> reason
> >> R1's ospf routes are not showing up in the routing table, can somebody
> help
> >> me figure out why the routes are not showing up ? i attached sh run's
> >> here..
> >>
> >> thanks
> >>
> >> belletjetrekken
> >> R1#sh run
> >> Building configuration...
> >>
> >> Current configuration : 1838 bytes
> >> !
> >> version 12.4
> >> service timestamps debug datetime msec
> >> service timestamps log datetime msec
> >> no service password-encryption
> >> !
> >> hostname R1
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> no aaa new-model
> >> !
> >> resource policy
> >> !
> >> no network-clock-participate slot 1
> >> no network-clock-participate wic 0
> >> ip subnet-zero
> >> ip cef
> >> !
> >> !
> >> !
> >> !
> >> no ip domain lookup
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> interface Loopback0
> >> ip address 1.1.1.1 255.0.0.0
> >> !
> >> interface FastEthernet0/0
> >> no ip address
> >> duplex auto
> >> speed auto
> >> !
> >> interface Serial0/0
> >> no ip address
> >> no dce-terminal-timing-enable
> >> !
> >> interface Serial0/0.12
> >> ip address 131.1.12.1 255.255.255.0
> >> ip ospf message-digest-key 1 md5 Cisco12
> >> !
> >> interface FastEthernet0/1
> >> no ip address
> >> shutdown
> >> duplex auto
> >> speed auto
> >> !
> >> interface Serial0/1
> >> no ip address
> >> shutdown
> >> no dce-terminal-timing-enable
> >> !
> >> router ospf 1
> >> router-id 1.1.1.1
> >> log-adjacency-changes
> >> area 2 authentication message-digest
> >> network 0.0.0.0 255.255.255.255 area 2
> >> !
> >> ip classless
> >> !
> >> !
> >> no ip http server
> >> no ip http secure-server
> >> !
> >> !
> >> !
> >> !
> >> control-plane
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> alias exec siib show ip int br
> >> alias exec scn show cdp neighbors
> >> alias exec scnd show cdp neighbors detail
> >> alias exec svb show vlan brief
> >> alias exec svs show vtp stat
> >> alias exec sion show ip ospf nei
> >> alias exec siond show ip ospf nei det
> >> alias exec siodr show ip ospf database router
> >> alias exec sioi show ip ospf int
> >> alias exec sen show eigrp nei
> >> alias exec send show eigrp nei det
> >> alias exec ss show spanning-tree
> >> alias exec sss show spanning-tree summary
> >> alias exec ssd show spanning-tree detail
> >> alias exec ssm show spanning-tree mst
> >> alias exec ssr show spanning-tree root
> >> alias exec ssb show spanning-tree blockedports
> >> alias exec sv show version
> >> alias exec sir show ip route
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> logging synchronous
> >> line aux 0
> >> line vty 0 4
> >> login
> >> !
> >> !
> >> end
> >>
> >> R1#
> >> R2#sh run
> >> Building configuration...
> >>
> >> Current configuration : 1974 bytes
> >> !
> >> version 12.4
> >> service timestamps debug datetime msec
> >> service timestamps log datetime msec
> >> no service password-encryption
> >> !
> >> hostname R2
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> no aaa new-model
> >> !
> >> resource policy
> >> !
> >> no network-clock-participate slot 1
> >> no network-clock-participate wic 0
> >> ip subnet-zero
> >> ip cef
> >> !
> >> !
> >> !
> >> !
> >> no ip domain lookup
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> interface Loopback0
> >> ip address 2.2.2.2 255.0.0.0
> >> !
> >> interface FastEthernet0/0
> >> ip address 131.1.23.2 255.255.255.0
> >> duplex auto
> >> speed auto
> >> !
> >> interface Serial0/0
> >> no ip address
> >> no dce-terminal-timing-enable
> >> !
> >> interface Serial0/0.21
> >> ip address 131.1.12.2 255.255.255.0
> >> ip ospf message-digest-key 1 md5 Cisco12
> >> !
> >> interface FastEthernet0/1
> >> no ip address
> >> shutdown
> >> duplex auto
> >> speed auto
> >> !
> >> interface Serial0/1
> >> no ip address
> >> shutdown
> >> no dce-terminal-timing-enable
> >> !
> >> router ospf 1
> >> router-id 2.2.2.2
> >> log-adjacency-changes
> >> area 1 virtual-link 3.3.3.3
> >> area 2 authentication message-digest
> >> network 2.2.2.2 0.0.0.0 area 2
> >> network 22.2.2.2 0.0.0.0 area 1
> >> network 131.1.12.2 0.0.0.0 area 2
> >> network 131.1.23.2 0.0.0.0 area 1
> >> !
> >> ip classless
> >> !
> >> !
> >> ip http server
> >> no ip http secure-server
> >> !
> >> !
> >> !
> >> !
> >> control-plane
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> alias exec siib show ip int br
> >> alias exec scn show cdp neighbors
> >> alias exec scnd show cdp neighbors detail
> >> alias exec svb show vlan brief
> >> alias exec svs show vtp stat
> >> alias exec sion show ip ospf nei
> >> alias exec siond show ip ospf nei det
> >> alias exec siodr show ip ospf database router
> >> alias exec sioi show ip ospf int
> >> alias exec sen show eigrp nei
> >> alias exec send show eigrp nei det
> >> alias exec ss show spanning-tree
> >> alias exec sss show spanning-tree summary
> >> alias exec ssd show spanning-tree detail
> >> alias exec ssm show spanning-tree mst
> >> alias exec ssr show spanning-tree root
> >> alias exec ssb show spanning-tree blockedports
> >> alias exec sv show version
> >> alias exec sir show ip route
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> logging synchronous
> >> line aux 0
> >> line vty 0 4
> >> !
> >> !
> >> end
> >>
> >> R2#
> >> R3#sh run
> >> Building configuration...
> >>
> >> Current configuration : 1897 bytes
> >> !
> >> version 12.4
> >> service timestamps debug datetime msec
> >> service timestamps log datetime msec
> >> no service password-encryption
> >> !
> >> hostname R3
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> no aaa new-model
> >> !
> >> resource policy
> >> !
> >> no network-clock-participate slot 1
> >> no network-clock-participate wic 0
> >> ip subnet-zero
> >> ip cef
> >> !
> >> !
> >> !
> >> !
> >> no ip domain lookup
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> interface Loopback0
> >> ip address 3.3.3.3 255.0.0.0
> >> !
> >> interface FastEthernet0/0
> >> ip address 131.1.23.3 255.255.255.0
> >> duplex auto
> >> speed auto
> >> !
> >> interface Serial0/0
> >> no ip address
> >> no dce-terminal-timing-enable
> >> !
> >> interface Serial0/0.34
> >> ip address 131.1.34.3 255.255.255.0
> >> !
> >> interface FastEthernet0/1
> >> no ip address
> >> shutdown
> >> duplex auto
> >> speed auto
> >> !
> >> interface Serial0/1
> >> no ip address
> >> shutdown
> >> no dce-terminal-timing-enable
> >> !
> >> router ospf 1
> >> router-id 3.3.3.3
> >> log-adjacency-changes
> >> area 1 virtual-link 2.2.2.2
> >> network 3.3.3.3 0.0.0.0 area 1
> >> network 33.3.3.3 0.0.0.0 area 0
> >> network 131.1.23.3 0.0.0.0 area 1
> >> network 131.1.34.3 0.0.0.0 area 0
> >> !
> >> ip classless
> >> !
> >> !
> >> no ip http server
> >> no ip http secure-server
> >> !
> >> !
> >> !
> >> !
> >> control-plane
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> alias exec siib show ip int br
> >> alias exec scn show cdp neighbors
> >> alias exec scnd show cdp neighbors detail
> >> alias exec svb show vlan brief
> >> alias exec svs show vtp stat
> >> alias exec sion show ip ospf nei
> >> alias exec siond show ip ospf nei det
> >> alias exec siodr show ip ospf database router
> >> alias exec sioi show ip ospf int
> >> alias exec sen show eigrp nei
> >> alias exec send show eigrp nei det
> >> alias exec ss show spanning-tree
> >> alias exec sss show spanning-tree summary
> >> alias exec ssd show spanning-tree detail
> >> alias exec ssm show spanning-tree mst
> >> alias exec ssr show spanning-tree root
> >> alias exec ssb show spanning-tree blockedports
> >> alias exec sv show version
> >> alias exec sir show ip route
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> logging synchronous
> >> line aux 0
> >> line vty 0 4
> >> !
> >> !
> >> end
> >>
> >> R3#
> >> R4#sh run
> >> Building configuration...
> >>
> >> Current configuration : 1683 bytes
> >> !
> >> version 12.4
> >> service timestamps debug datetime msec
> >> service timestamps log datetime msec
> >> no service password-encryption
> >> !
> >> hostname R4
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> no aaa new-model
> >> !
> >> resource policy
> >> !
> >> no network-clock-participate slot 1
> >> no network-clock-participate wic 0
> >> ip subnet-zero
> >> ip cef
> >> !
> >> !
> >> !
> >> !
> >> no ip domain lookup
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> interface Loopback0
> >> ip address 4.4.4.4 255.0.0.0
> >> !
> >> interface FastEthernet0/0
> >> no ip address
> >> shutdown
> >> duplex auto
> >> speed auto
> >> !
> >> interface Serial0/0
> >> no ip address
> >> no dce-terminal-timing-enable
> >> !
> >> interface Serial0/0.43
> >> ip address 131.1.34.3 255.255.255.0
> >> !
> >> interface FastEthernet0/1
> >> no ip address
> >> shutdown
> >> duplex auto
> >> speed auto
> >> !
> >> router ospf 1
> >> router-id 4.4.4.4
> >> log-adjacency-changes
> >> network 0.0.0.0 255.255.255.255 area 0
> >> !
> >> ip classless
> >> !
> >> !
> >> no ip http server
> >> no ip http secure-server
> >> !
> >> !
> >> !
> >> !
> >> control-plane
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> !
> >> alias exec siib show ip int br
> >> alias exec scn show cdp neighbors
> >> alias exec scnd show cdp neighbors detail
> >> alias exec svb show vlan brief
> >> alias exec svs show vtp stat
> >> alias exec sion show ip ospf nei
> >> alias exec siond show ip ospf nei det
> >> alias exec siodr show ip ospf database router
> >> alias exec sioi show ip ospf int
> >> alias exec sen show eigrp nei
> >> alias exec send show eigrp nei det
> >> alias exec ss show spanning-tree
> >> alias exec sss show spanning-tree summary
> >> alias exec ssd show spanning-tree detail
> >> alias exec ssm show spanning-tree mst
> >> alias exec ssr show spanning-tree root
> >> alias exec ssb show spanning-tree blockedports
> >> alias exec sv show version
> >> alias exec sir show ip route
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> logging synchronous
> >> line aux 0
> >> line vty 0 4
> >> !
> >> !
> >> end
> >>
> >> R4#
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> > _________________________________________________________________
> > Windows Live Hotmail.: more than just e-mail.
> > http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_more_042009
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
*Mar 3 01:01:44.095: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:01:44.095: OSPF: Rcv hello from 3.3.3.3 area 1 from FastEthernet0/0 131.1.23.3
*Mar 3 01:01:44.095: OSPF: End of hello processing
R2#
*Mar 3 01:01:46.791: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.2
R2#
*Mar 3 01:01:54.095: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:01:54.095: OSPF: Rcv hello from 3.3.3.3 area 1 from FastEthernet0/0 131.1.23.3
*Mar 3 01:01:54.095: OSPF: End of hello processing
R2#
*Mar 3 01:01:56.792: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.2
R2#
*Mar 3 01:02:04.095: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:04.095: OSPF: Rcv hello from 3.3.3.3 area 1 from FastEthernet0/0 131.1.23.3
*Mar 3 01:02:04.095: OSPF: End of hello processing
R2#
*Mar 3 01:02:06.792: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.2
R2#
*Mar 3 01:02:13.399: OSPF: rcv. v:2 t:4 l:76 rid:3.3.3.3
aid:0.0.0.1 chk:3F5F aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:14.096: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:14.096: OSPF: Rcv hello from 3.3.3.3 area 1 from FastEthernet0/0 131.1.23.3
*Mar 3 01:02:14.096: OSPF: End of hello processing
R2#
*Mar 3 01:02:16.792: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.2
R2#
*Mar 3 01:02:24.096: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:24.096: OSPF: Rcv hello from 3.3.3.3 area 1 from FastEthernet0/0 131.1.23.3
*Mar 3 01:02:24.096: OSPF: End of hello processing
R2#
*Mar 3 01:02:26.793: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.2
R2#
*Mar 3 01:02:34.097: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:34.097: OSPF: Rcv hello from 3.3.3.3 area 1 from FastEthernet0/0 131.1.23.3
*Mar 3 01:02:34.097: OSPF: End of hello processing
R2#
*Mar 3 01:02:36.793: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.2
R2#
*Mar 3 01:02:44.097: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:44.097: OSPF: Rcv hello from 3.3.3.3 area 1 from FastEthernet0/0 131.1.23.3
*Mar 3 01:02:44.097: OSPF: End of hello processing
R2#
*Mar 3 01:02:46.793: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.2
R2#
*Mar 3 01:02:54.097: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:54.097: OSPF: Rcv hello from 3.3.3.3 area 1 from FastEthernet0/0 131.1.23.3
*Mar 3 01:02:54.097: OSPF: End of hello processing
R2#
*Mar 3 01:02:56.794: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.2
R2#
*Mar 3 01:03:04.098: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:03:04.098: OSPF: Rcv hello from 3.3.3.3 area 1 from FastEthernet0/0 131.1.23.3
*Mar 3 01:03:04.098: OSPF: End of hello processing
R2#
*Mar 3 01:03:06.794: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.2
R2#
R3# debug ip ospf packet
OSPF packet debugging is on
R3#debug ip ospf hello
OSPF hello events debugging is on
R3#
*Mar 3 01:01:41.154: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:01:43.850: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:01:43.850: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:01:43.850: OSPF: End of hello processing
R3#
*Mar 3 01:01:51.154: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:01:53.851: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:01:53.851: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:01:53.851: OSPF: End of hello processing
R3#
*Mar 3 01:02:01.155: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:02:03.851: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:03.851: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:02:03.851: OSPF: End of hello processing
R3#
*Mar 3 01:02:11.155: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:02:12.958: OSPF: rcv. v:2 t:5 l:44 rid:2.2.2.2
aid:0.0.0.1 chk:8093 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:13.851: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:13.851: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:02:13.851: OSPF: End of hello processing
R3#
*Mar 3 01:02:21.155: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:02:23.852: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:23.852: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:02:23.852: OSPF: End of hello processing
R3#
*Mar 3 01:02:31.156: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:02:33.852: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:33.852: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:02:33.852: OSPF: End of hello processing
R3#
*Mar 3 01:02:41.156: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:02:43.853: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:43.853: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:02:43.853: OSPF: End of hello processing
R3#
*Mar 3 01:02:51.157: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:02:53.853: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:02:53.853: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:02:53.853: OSPF: End of hello processing
R3#
*Mar 3 01:03:01.157: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:03:03.853: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:03:03.853: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:03:03.853: OSPF: End of hello processing
R3#
*Mar 3 01:03:11.157: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:03:13.854: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:03:13.854: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:03:13.854: OSPF: End of hello processing
R3#
*Mar 3 01:03:21.158: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:03:23.854: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:03:23.854: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:03:23.854: OSPF: End of hello processing
R3#
*Mar 3 01:03:31.158: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:03:33.855: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:03:33.855: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:03:33.855: OSPF: End of hello processing
R3#
*Mar 3 01:03:41.159: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:03:43.855: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:03:43.855: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:03:43.855: OSPF: End of hello processing
R3#
*Mar 3 01:03:51.159: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:03:53.855: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:03:53.855: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:03:53.855: OSPF: End of hello processing
R3#
*Mar 3 01:04:01.159: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:04:03.856: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:04:03.856: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:04:03.856: OSPF: End of hello processing
R3#
*Mar 3 01:04:11.160: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:04:13.856: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:04:13.856: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:04:13.856: OSPF: End of hello processing
R3#
*Mar 3 01:04:21.160: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
*Mar 3 01:04:23.857: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.1 chk:AE87 aut:0 auk: from FastEthernet0/0
*Mar 3 01:04:23.857: OSPF: Rcv hello from 2.2.2.2 area 1 from FastEthernet0/0 131.1.23.2
*Mar 3 01:04:23.857: OSPF: End of hello processing
R3#
*Mar 3 01:04:31.161: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 131.1.23.3
R3#
Blogs and organic groups at http://www.ccie.net
Received on Fri May 01 2009 - 09:50:09 ART
This archive was generated by hypermail 2.2.0 : Mon Jun 01 2009 - 07:04:41 ART