RE: Voice issue

From: sameer inam <i_sameer_at_hotmail.com>
Date: Mon, 27 Apr 2009 10:05:37 +0000

please see teh vocie gateway config . and please advice how do I confgiure the
complexity .

thanks for your help .

no network-clock-participate slot 1
no ip source-route
ip tcp synwait-time 10
!
!
ip cef
!
!
ip ftp username juan
ip ftp password 7 04511E0701
no ip bootp server
ip domain name corp.kbr.com
ip name-server 34.64.0.1
ip name-server 34.96.0.1
ip ssh time-out 60
ip ssh authentication-retries 2
isdn switch-type primary-net5
!
voice-card 0
 dspfarm
!
voice-card 1
 dspfarm
!
!
voice rtp send-recv
!
voice service pots
!
voice service voip
!
!
voice class codec 10
 codec preference 1 g711ulaw
 codec preference 2 g711alaw
 codec preference 3 g729br8
!
!
!
!
!
!
!
!
!
!
crypto pki trustpoint TP-self-signed-262411583
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-262411583
 revocation-check none
 rsakeypair TP-self-signed-262411583
!
!
!
!
controller E1 1/0
 framing NO-CRC4
 pri-group timeslots 1-16
 description PRI_3816500 [6500-6599]
!
controller E1 1/1
!
translation-rule 1
 Rule 1 ^. 9
!
gw-accounting aaa
 acct-template callhistory-detail
!
!
!
!
interface FastEthernet0/0
 description UPLINK to KBR-CORE Layer-3
 ip address 34.108.253.26 255.255.255.252
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip route-cache flow
 load-interval 30
 duplex full
 speed 100
 no mop enabled
 h323-gateway voip interface
 h323-gateway voip bind srcaddr 34.108.253.26
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial1/0:15
 no ip address
 encapsulation hdlc
 isdn switch-type primary-net5
 isdn incoming-voice voice
 no cdp enable
!
ip route 0.0.0.0 0.0.0.0 34.108.253.25
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 1/0:15
 translate calling 1
 echo-cancel coverage 24
!
!
!
!
dial-peer cor custom
!
!
!
dial-peer voice 1 pots
 destination-pattern 9[2-9]......
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 forward-digits 7
!
dial-peer voice 2 pots
 destination-pattern 9050.......
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 050
!
dial-peer voice 3 pots
 destination-pattern 90[2-4].......
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 0
!
dial-peer voice 4 pots
 destination-pattern 90[6-7].......
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 0
!
dial-peer voice 5 pots
 destination-pattern 909.......
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 09
!
dial-peer voice 6 pots
 destination-pattern 900T
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 00
!
dial-peer voice 8 pots
 destination-pattern 1..
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 forward-digits all
!
dial-peer voice 10 pots
 destination-pattern 91..
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 1
!
dial-peer voice 7 pots
 destination-pattern 999
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 forward-digits all
!
dial-peer voice 9 pots
 destination-pattern 9999
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 999
!
dial-peer voice 11 pots
 incoming called-number 6[5-8]..
 direct-inward-dial
!
dial-peer voice 600 voip
 preference 1
 destination-pattern 6[5-8]..
 voice-class codec 10
 session target ipv4:34.108.23.20
 dtmf-relay h245-alphanumeric
 fax rate disable
 ip qos dscp cs5 media
 ip qos dscp cs5 signaling
 no vad
!
dial-peer voice 500 voip
 preference 2
 destination-pattern 6[5-8]..
 voice-class codec 10
 session target ipv4:34.108.23.10
 dtmf-relay h245-alphanumeric
 fax rate disable
 ip qos dscp cs5 media
 ip qos dscp cs5 signaling
!
dial-peer voice 12 pots
 destination-pattern 9800T
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 800
!
dial-peer voice 13 pots
 destination-pattern 98000T
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 8000
!
dial-peer voice 14 pots
 destination-pattern 9600T
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 600
!
dial-peer voice 15 pots
 destination-pattern 9055.......
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 055
!
dial-peer voice 16 pots
 destination-pattern 9056.......
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 direct-inward-dial
 prefix 056
!

> To: i_sameer_at_hotmail.com; ccielab_at_groupstudy.com; costephe_at_cisco.com
> Subject: Re: Voice issue
> Date: Sun, 26 Apr 2009 10:01:56 -0400
> From: armylegionmedic_at_aol.com
>
> Have you already configured you Media Resources on the Gateway? If you have,
I would also lower the number of assigned resourcesto your conferencing and
MTP/ Transcoding.
>
> Can you send a show run?
>
>
>
> Regards,
>
> James
>
>
>
>
> -----Original Message-----
> From: sameer inam <i_sameer_at_hotmail.com>
> To: ccielab_at_groupstudy.com; costephe_at_cisco.com
> Sent: Sun, 26 Apr 2009 12:51 am
> Subject: Voice issue
>
>
>
>
>
>
>
>
>
>
> Hello Guys,
>
>
>
> I need some help , I trying to install the New Voice gateway due to some
> reason its gave me errors, please see below , when I configured the
controller
> E1 1/0 it gave me the below error ..
>
>
>
>
>
> #controlLer E1 1/0
> controller)#pr
> controller)#pri-group ?
>
>
> pri-group timeslots 1-31
>
>
>
>
>
> % Not enough DSP resources available to configure pri-group on controller
E1
> 1/0
> % The remaining dsp resources are enough for 0 time slots.
> % For current codec complexity, 2 extra dsp(s) are required to create this
> voice
> port.
>
>
>
>
>
> NM-HDV2-2T1/E1 (Network E1 CONTROLLER )
>
>
>
> Thanks,
>
>
>
> Sameer
>
>
>
>
>
>
> _________________________________________________________________
> Show them the way! Add maps and directions to your party invites.
> http://www.microsoft.com/windows/windowslive/products/events.aspx
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
Received on Mon Apr 27 2009 - 10:05:37 ART

This archive was generated by hypermail 2.2.0 : Mon May 04 2009 - 07:39:13 ART