Re: UCM 6.1 Conference calls and placing on hold disconnecting

I'm in the same boat, as I just get one of our guys to go do a shut, no shut
on whatever site is complaining dsp profile for conferencing.

A little OT, but 7.0.1 also broke our SIP trunks we use for outbound calling
to where we were only getting call setup and no media. IOS upgrade fixed
this problem. debug ccsip commands didn't show anything out of the
ordinary.

I have a feeling complaints like these are why there is a 1+ GB "update" on
CCO that I really need to get around to loading. The conferencing just
reared its head this week. I haven't been able to deduce a pattern yet.

On Fri, Apr 24, 2009 at 4:36 PM, Brad Ellis <brad_at_ccbootcamp.com> wrote:

> Lovely. Ive had this happen with a customer for a while. They have way
> too many phones to try and grab traces (it takes 2-3 months for this bug to
> show) so we havent determined the root cause. What have you seen as the
> cause? Still unknown?
>
>
>
> thanks,
>
> Brad Ellis
>
> CCIE#5796 (R&S / Security)
>
> CCSI# 30482
>
> CEO / President
>
> CCBOOTCAMP - Cisco Learning Partner (CLP)
>
> Email: brad_at_ccbootcamp.com
>
> Toll Free: 877-654-2243
>
> International: +1-702-968-5100
>
> Skype: skype:ccbootcamp?call
>
> FAX: +1-702-446-8012
>
> YES! We take Cisco Learning Credits!
>
> Training And Remote Racks: http://www.ccbootcamp.com
>
>
> ------------------------------
>
> *From:* D.H. Williams [mailto:draythw_at_gmail.com]
> *Sent:* Friday, April 24, 2009 2:24 PM
> *To:* Brad Ellis
> *Cc:* Pamela Pinero; ccielab_at_groupstudy.com
> *Subject:* Re: UCM 6.1 Conference calls and placing on hold disconnecting
> calls
>
>
>
> FYI, but just ran across this in 7.0.1 as well.
>
> DH
> 16790
>
> On Fri, Apr 24, 2009 at 4:14 PM, Brad Ellis <brad_at_ccbootcamp.com> wrote:
>
> Take a look at your conference bridge resources using RTMT. You could
> have some resources in a "stuck" state. I think this is a known bug in
> UC 6.1. If you don't want to do any troubleshooting and you just want to
> try to fix it, restart your conference bridge and see if that does the
> trick.
>
> thanks,
> Brad Ellis
> CCIE#5796 (R&S / Security)
> CCSI# 30482
> CEO / President
> CCBOOTCAMP - Cisco Learning Partner (CLP)
> Email: brad_at_ccbootcamp.com
> Toll Free: 877-654-2243
> International: +1-702-968-5100
> Skype: skype:ccbootcamp?call
> FAX: +1-702-446-8012
> YES! We take Cisco Learning Credits!
> Training And Remote Racks: http://www.ccbootcamp.com
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Pamela Pinero
> Sent: Friday, April 24, 2009 2:07 PM
> To: ccielab_at_groupstudy.com
> Subject: UCM 6.1 Conference calls and placing on hold disconnecting
> calls
>
> When I try to put someone on hold or do a conference call, the call
> drops.
> It was working fine for the past two weeks without any issues. Help.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Apr 24 2009 - 16:46:13 ART