RE: MoH on CME

Godswill,

I assume you used 8-bit ulaw with CCCIT? I can't remember if I used a .wav on CME or not, but they are particular about encoding.

-ryan

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Godswill Oletu
Sent: Sunday, April 19, 2009 7:16 AM
To: Radioactive Frog
Cc: Julian Pentermann; ccie; ccielab_at_groupstudy.com
Subject: Re: MoH on CME

I suppose you meant 'multicast-moh' goes under ephone; I think you really only mess with the ephone-dn when you are doing live moh.

In the past, each time I play a .wav file, all I hear from the phone is noise. Does that have anything to do with the frequency of my recording? Cisco documentation tend to suggestion that .wav files can be used, but has anyone implemented it with success? I have not had any problem with .au files.

Godswill Oletu
CCIE #16464 (R&S)

  ----- Original Message -----
  From: Radioactive Frog
  To: Godswill Oletu
  Cc: Julian Pentermann ; ccie ; ccielab_at_groupstudy.com
  Sent: Saturday, April 18, 2009 5:17 PM
  Subject: Re: MoH on CME

  Few things to consider..

  1. Make sure your Multicast MOH address is not in 224.x.x..x range. it should be in 239.xx.x. range.

  Config t
  telephony-services

  moh minuet.wav
  multicast moh 239.1.1.1 port 2000

  2. CME version 3 doesn't support MOH, only 4 and above.

  3. if you've configured phone for pagging-dn or unicast keyword then cme v4 will also not support moh.

  4. MOH is supported for internal calls only :) bummer!

  5. in Ephone-dn make sure you've multicast-moh keyword :)

  -frog

  On Sat, Apr 18, 2009 at 8:50 PM, Godswill Oletu <oletu_at_inbox.lv> wrote:

    what is your CME config?

    Godswill Oletu
    CCIE #16464 (R&S)

    ----- Original Message ----- From: "Julian Pentermann" <julianalex189_at_gmail.com>
    To: "ccie" <ccie_at_just-horizon.com>
    Cc: <ccielab_at_groupstudy.com>
    Sent: Saturday, April 18, 2009 6:29 AM
    Subject: Re: MoH on CME

      Hey

      Are you using ip communicator or a physical ip phone?

      Cheers,
      Julian

      On Sat, Apr 18, 2009 at 7:09 PM, ccie <ccie_at_just-horizon.com> wrote:

        Hi experts,

        I have configured the CME MoH 100% correct, but I still can't hear my MoH.

        I hear the double beep that indicates that I am on hold but I don't hear
        mine.

        Any advice about that?

        Regards,

        Amin

        Blogs and organic groups at http://www.ccie.net

        _______________________________________________________________________
        Subscription information may be found at:
        http://www.groupstudy.com/list/CCIELab.html

      Blogs and organic groups at http://www.ccie.net

      _______________________________________________________________________
      Subscription information may be found at:
      http://www.groupstudy.com/list/CCIELab.html

    Blogs and organic groups at http://www.ccie.net

    _______________________________________________________________________
    Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Apr 19 2009 - 10:21:09 ART