Re: Disabling spanning tree

STP is still operational as the port still must transtion through the
various port states, in this case you have portfast which is a STP feature.
That's still STP wouldn't you agree regardless of BPDU's being filtered or
not? I don't have access to a switch at the moment, but I agree with your
test. My argument is that you can't disable STP on a per port basis.
Jonathan Greenwood II
CCIE #22744

On Thu, Apr 16, 2009 at 11:40 AM, Tony Varriale
<tvarriale_at_flamboyaninc.com>wrote:

> The question mentions nothing about TCNs or port flapping.
>
> How about config BPDUs? Put it up in a lab...
>
> Here's a quick example in production for you that has portfast but not
> bpdufilter:
>
> interface GigabitEthernet9/12
> switchport
> switchport access vlan 12
> switchport mode access
> spanning-tree portfast
>
> xyz#sh spanning-tree int g9/12 d
> BPDU: sent 10566749, received 0
>
> Spanning tree is not disabled. Period.
>
> Here's one in production with bpdufilter:
>
> xyz#sh run int g1/1
> Building configuration...
>
> Current configuration : 171 bytes
> !
> interface GigabitEthernet1/1
> switchport access vlan 201
> switchport mode access
> spanning-tree portfast
> spanning-tree bpdufilter enable
>
> xyz#sh spanning-tree int g1/1 d
> BPDU: sent 0, received 0
>
> No BPDUs sent or received. If both are none, would you say it's
> participating in spanning tree?
>
> tv
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Jonathan Greenwood II
> Sent: Thursday, April 16, 2009 1:25 PM
> To: Tharak Abraham
> Cc: Salah ElShekeil; ccielab
> Subject: Re: Disabling spanning tree
>
> With portfast TCN BPDU's will not be sent if a port goes up or down thats
> configured for portfast. FYI
>
> Jonathan Greenwood II
> CCIE #22744
>
> On Thu, Apr 16, 2009 at 11:17 AM, Tharak Abraham
> <tharakabraham_at_gmail.com>wrote:
>
> > Spanning tree would be still be active even if you enable portfast and
> > bpdus will be sent out !
> >
> > bpdu filter on access ports will stop all kinds of bpdu's and hence that
> > should be more appropriate in this context !
> >
> >
> > Tharak Abraham Luke
> >
> >
> > On Thu, Apr 16, 2009 at 8:04 PM, Jonathan Greenwood II <
> > gwood83_at_gmail.com> wrote:
> >
> >> I agree with Mr. West. They are looking for portfast based on your
> >> question.
> >>
> >> HTH
> >>
> >> Jonathan Greenwood II
> >> CCIE #22744
> >>
> >> On Thu, Apr 16, 2009 at 10:17 AM, Salah ElShekeil <
> >> salah.elshekeil_at_gmail.com
> >> > wrote:
> >>
> >> > Dear all,
> >> >
> >> >
> >> >
> >> > how to disable spanning tree on an interface without using "no
> spanning
> >> > tree" command?
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > Salah
> >> >
> >> >
> >> > Blogs and organic groups at http://www.ccie.net
> >> >
> >> >
> _______________________________________________________________________
> >> > Subscription information may be found at:
> >> > http://www.groupstudy.com/list/CCIELab.html
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >>
> >> --
> >> Jonathan Greenwood II
> >> CCIE #22744
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
>
>
> --
> Jonathan Greenwood II
> CCIE #22744
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Jonathan Greenwood II
CCIE #22744
Blogs and organic groups at http://www.ccie.net