Re: how to enable syslog and prevent syslog messages from

Hi Jeremy,

Not entirely sure I understand but it sounds like you only want debugs to
show up on the console, and not the other logging levels. As far as I know,
enabling a certain level includes all the lower ones as well. Once you
enable debugging to the console, you enable everything else. Remember debug
is just syslog level 7.

Bryan Bartik
CCIE #23707, CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com

On Thu, Apr 16, 2009 at 9:38 AM, rakesh m <raaki.88_at_gmail.com> wrote:

> i have never tried the options listed but i think the below command should
> meet your requirements
>
> Router(config)#logg con ?
> <0-7> Logging severity level
> alerts Immediate action needed (severity=1)
> critical Critical conditions (severity=2)
> debugging Debugging messages (severity=7)
> discriminator Establish MD-Console association
> emergencies System is unusable (severity=0)
> errors Error conditions (severity=3)
> filtered Enable filtered logging
> guaranteed Guarantee console messages
> informational Informational messages (severity=6)
> notifications Normal but significant conditions (severity=5)
> warnings Warning conditions (severity=4)
> xml Enable logging in XML
> <cr>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

--
Blogs and organic groups at http://www.ccie.net