RE: Frame-Relay

Paul,

Sh fram pvc | i DLCI, should be enough to see which ones are active. You should also use that command to allow for fram inarp on only a specific DLCI.

-ryan

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Paul Adams
Sent: Tuesday, April 14, 2009 2:05 PM
To: Tharak Abraham
Cc: Tony Schaffran (GS); Cisco certification
Subject: Re: Frame-Relay

Thank you.

Simple frame-relay setup was not working, and my gut feeling was that
solution applied was Corrrect.
Later after applying "Frame-relay lmi-type cisco" it started showing active
and working.

I could get into same issue at LAB Exams.

Normally DLCI are giving in Exam, what if not given, how could someone
identify the DLCI if not given.

On Tue, Apr 14, 2009 at 5:47 PM, Tharak Abraham <tharakabraham_at_gmail.com>wrote:

> Paul,
>
> * you might've been asking about the frame relay encapsulation types which
> could be IETF or the default encap ? For this, i think it should be
> default unless specified.
>
> * lmi-type would be be also specified or hinted what to be used for, or we
> could enable the debug frame-relay lmi and find it?
>
> (If no clue, the trial and error method + debugs maybe the last resort)
>
>
> Best Regards,
> Tharak Abraham.
>
>
>
> On Tue, Apr 14, 2009 at 4:12 PM, Tony Schaffran (GS) <
> groupstudy_at_cconlinelabs.com> wrote:
>
>> IETF and lmi-type cisco are not one or the other.
>>
>> I think you may be referring to lmi-type ansi or lmi-type cisco?
>>
>> If so, the default is cisco.
>>
>> More times than not, the setting will be cisco unless specified.
>>
>>
>> Tony Schaffran
>> Sr. Network Consultant
>> CCIE #11071
>> CCNP, CCNA, CCDA,
>> NNCDS, NNCSS, CNE, MCSE
>>
>> www.cconlinelabs.com
>> Your #1 choice for online Cisco rack rentals.
>>
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Paul
>> Adams
>> Sent: Tuesday, April 14, 2009 6:54 AM
>> To: Cisco certification
>> Subject: Frame-Relay
>>
>> Hi GS,
>>
>> Since we dont have access to Frame-relay Switch. How could we know if the
>> frame-relay switch interface is configured with
>> either frame-relay IETF or frame-relay lmi-type cisco.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Apr 14 2009 - 14:13:17 ART