Re: OSPF Distribute list.

you can configure the area as nssa "router 3"

then in R4 area XX nssa no-redist!!!

try this I think it's a solution

On Tue, Apr 14, 2009 at 2:12 AM, Narbik Kocharians <narbikk_at_gmail.com>wrote:

> Yes that is what i was referring to. That is the behavior. If the other
> router or routers were in another area, like area 0, and you wanted to have
> all the routers in your area to receive the external routes but not the
> routers in area 0 or the other areas behind area 0, you could even
> configure
> the "summary-address not-advertise" on the ABR, only if that area is
> configured as NSSA.
>
> On Mon, Apr 13, 2009 at 2:55 PM, Divin Mathew John <divinjohn_at_gmail.com
> >wrote:
>
> > @Narbik i tried the summary-address not advertise solution. with R3 in
> > NSSA. i put the summary address not advertise command in R4's ospf
> > process. 6.6.0.0/24 disappears from R2 and R3 .!
> > Thanking You
> >
> > Yours Sincerely
> >
> > Divin Mathew John
> > divinjohn_at_gmail.com
> > divin_at_dide3d.com
> > http://www.dide3d.com
> > +91 9945430983
> > +91 9846697191
> > +974 5008916
> > PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> > Sent from Bangalore, KA, India
> >
> >
> > On Tue, Apr 14, 2009 at 2:48 AM, Divin Mathew John <divinjohn_at_gmail.com
> >
> > wrote:
> > > maybe.! just tell us wht ur solution would be in multiarea OSPF!
> > > Thanking You
> > >
> > > Yours Sincerely
> > >
> > > Divin Mathew John
> > > divinjohn_at_gmail.com
> > > divin_at_dide3d.com
> > > http://www.dide3d.com
> > > +91 9945430983
> > > +91 9846697191
> > > +974 5008916
> > > PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> > > Sent from Bangalore, KA, India
> > >
> > >
> > > On Tue, Apr 14, 2009 at 2:43 AM, Paul Cosgrove <
> paul.cosgrove_at_gmail.com>
> > wrote:
> > >> In this scenario are you allowed to use two different OSPF processes
> on
> > R4?
> > >>
> > >> Paul.
> > >>
> > >> Divin Mathew John wrote:
> > >>>
> > >>> i have the following Scenario.
> > >>>
> > >>> R2<-----R4---->R3
> > >>> |
> > >>> |
> > >>> R1
> > >>>
> > >>> now.. R4 is running OSPF and EIGRP . Redistributing mutually. R2 and
> > >>> R3 are getting all the routes. R2 and R3 runnning OSPF. R1 is running
> > >>> EIGRP.
> > >>> Now say ... R1 has 6.6.0.0/24 in its routing table. While
> > >>> redistributing at R4 i dont want the 6.6.0.0/24 to be advertised to
> R3
> > >>> but R2 shud be able to reach the 6.6.0.0/24. I know that u can use a
> > >>> distribute list in on R3 and filter the routes. but can something be
> > >>> done on R4 to make 6.6.0.0 filtered towards R3 and not towards R2.
> > >>>
> > >>>
> > >>> Thanking You
> > >>>
> > >>> Yours Sincerely
> > >>>
> > >>> Divin Mathew John
> > >>> divinjohn_at_gmail.com
> > >>> divin_at_dide3d.com
> > >>> http://www.dide3d.com
> > >>> +91 9945430983
> > >>> +91 9846697191
> > >>> +974 5008916
> > >>> PGP PUBLIC KEY BLOCK @
> http://www.dide3d.com/divin_Public_PGP_key.txt
> > >>> Sent from Bangalore, KA, India
> > >>>
> > >>>
> > >>> Blogs and organic groups at http://www.ccie.net
> > >>>
> > >>>
> _______________________________________________________________________
> > >>> Subscription information may be found at:
> > >>> http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Narbik Kocharians
> CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> www.MicronicsTraining.com <http://www.micronicstraining.com/>
> www.Net-Workbooks.com <http://www.net-workbooks.com/>
> Sr. Technical Instructor
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Apr 14 2009 - 07:05:53 ART