Re: OSPF Distribute list.

Divin,

Since R2, R3 and R4 are all in the same area they need to have the same
LSA's, the distribute-list out command in ospf doesnt do a thing because of
this. (see some earlier discussions about this on the archives)

The only command i can think of on R4 to get your task going is to configure
'ip ospf database-filter all out' on R4 s0/0 interface.

2009/4/13 Divin Mathew John <divinjohn_at_gmail.com>

> i have the following Scenario.
>
> R2<-----R4---->R3
> |
> |
> R1
>
> now.. R4 is running OSPF and EIGRP . Redistributing mutually. R2 and
> R3 are getting all the routes. R2 and R3 runnning OSPF. R1 is running
> EIGRP.
> Now say ... R1 has 6.6.0.0/24 in its routing table. While
> redistributing at R4 i dont want the 6.6.0.0/24 to be advertised to R3
> but R2 shud be able to reach the 6.6.0.0/24. I know that u can use a
> distribute list in on R3 and filter the routes. but can something be
> done on R4 to make 6.6.0.0 filtered towards R3 and not towards R2.
>
>
> Thanking You
>
> Yours Sincerely
>
> Divin Mathew John
> divinjohn_at_gmail.com
> divin_at_dide3d.com
> http://www.dide3d.com
> +91 9945430983
> +91 9846697191
> +974 5008916
> PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> Sent from Bangalore, KA, India
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Wouter Prins
wp_at_null0.nl
0x301FA912
Blogs and organic groups at http://www.ccie.net