Re: dot1q tunneling with COS

DOH, nice buddy.
thanks :)

On Mon, Apr 13, 2009 at 7:46 AM, Radioactive Frog <pbhatkoti_at_gmail.com>wrote:

> hehe...........
> you are doing it on the interface level.
> try on the config t level
>
> e.g.
>
> config t
> *l2protocol-tunnel cos 3
>
> frog
> *
> On Mon, Apr 13, 2009 at 3:39 PM, Ruhann <groupstudy_at_ru.co.za> wrote:
>
>> Hi guys
>>
>> Busy configuring a dot1Q tunnel from one task and the task asks that
>> tunnel
>> frame should have a COS of 3.
>>
>> The solution is the following:
>> interface FastEthernet0/4
>> switchport access vlan 123
>> switchport mode dot1q-tunnel
>> l2protocol-tunnel cdp
>> * l2protocol-tunnel cos 3 *
>> no cdp enable
>> end
>> I do not have that as a option of any of my switches nor the rack that I'm
>> renting.
>>
>> * l2protocol-tunnel cos 3 *
>>
>> The IOS versions I tried this on is :
>> C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(44)SE3, RELEASE
>> SOFTWARE (fc2)
>> C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(46)SE, RELEASE
>> SOFTWARE (fc2)
>> C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(25)SEE4, RELEASE
>> SOFTWARE (fc1)
>> Enabling mls qos, or changing the sdm profile does not seem the make any
>> difference.
>>
>> Any Ideas on what im missing?
>>
>> Regards
>> --
>> <ruhann>
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>

-- 
<ruhann>
Blogs and organic groups at http://www.ccie.net