Re: RE: strange nat problem .. memory allocation

try reloading the device once....this might be because of process not
freed up after use...

kingsley
On Fri, 10 Apr 2009 Ryan West wrote :
>Rakesh,
>
>Sounds like you're trying to do too much with not enough memory. Can you
post a show ver?
>
>Check out the output interpreter if you want more details.
>
>https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl
>
>-ryan
>
>-----Original Message-----
> From: nobody_at_groupstudy.com
[mailto:nobody_at_groupstudy.com] On Behalf Of rakesh m
>Sent: Friday, April 10,
2009 9:18 AM
>To: ccielab_at_groupstudy.com
>Subject: strange nat problem ..
memory allocation
>
>i was doing a self designed simple three router topology
nat problem and i
>encountered this following error . i have no idea of this
error can any one
>please explain me what this means .. as i read it i could
understand that
>memory couldnt be allocated
>
>r0(config-if)#ip nat inside
>%
NBAR ERROR: due to memory problem, parsing stopped
>% NBAR Error : Activation
failed due to insufficient dynamic memory
>% NBAR Error: Stile could not add
protocol node
>%NAT: Error activating CNBAR on the interface FastEthernet0/0
>r0(config-if)#
>*Mar 1 00:09:47.919: %SYS-2-MALLOCFAIL: Memory allocation of
10260 bytes
>fail
> from 0x628E2ED4, alignment 0
>Pool: Processor Free:
24448 Cause: Memory fragmentation
>Alternate Pool: None Free: 0 Cause: No
Alternate pool
> -Process= "Exec", ipl= 0, pid= 92, -Traceback= 0x61467A3C
0x600165C4
>0x6001C
>0 0x6001C9F4 0x6362C6AC 0x628E2EDC 0x628C18A0 0x628C21D8
0x628C2150
>0x628C2150
>x628C2D18 0x628F5F5C 0x62900984 0x628EDC1C 0x6290AD90
0x6290B110
>r0(config-if)#
>*Mar 1 00:09:47.931: %NBAR-2-NOMEMORY: No memory
available for StILE
>lmalloc,
>-Traceback= 0x61467A3C 0x628E2EF8 0x628C18A0
0x628C21D8 0x628C2150
>0x628C2150
>628C2D18 0x628F5F5C 0x62900984 0x628EDC1C
0x6290AD90 0x6290B110 0x61C4742C
>0x6
>49BDC 0x614B3A8C 0x614D759C
>r0(config-if)#int fa0/1
>r0(config-if)#ip nat outside
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol
addition
>% NBAR ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR
ERROR: symbol addition
>% NBAR ERROR: symbol addition
>% NBAR Error :
Activation failed due to insufficient dynamic memory
>% NBAR Error: Stile
could not add protocol node
>%NAT: Error activating CNBAR on the interface
FastEthernet0/1
>r0(config-if)#
>*Mar 1 00:10:06.827: CCE_CP: Can't
cce_create_class_group: Can't allocate
>cla
> group id.
>r0(config-if)#
>
>btw iam doing this on gns3
>
>
>Blogs and organic groups at
http://www.ccie.net
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>
>Blogs and organic groups at
http://www.ccie.net
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jan 01 2000 - 01:01:01 ARST