Re: Tunnel from VRF-lite router

What is your tunnel config?
Only thing to keep in mind is the source interface. If the Is part of a vrf, you need to use the tunnel vrf command. If not, you don't need it.

-----Original Message-----
From: Service Provider <service.providersa_at_gmail.com>

Date: Wed, 8 Apr 2009 15:36:59
To: Cisco certification<comserv_at_groupstudy.com>; Cisco certification<ccielab_at_groupstudy.com>
Subject: Tunnel from VRF-lite router

hello guys

I have a 'strange' problem with the tunnel interface that is not coming up
when configured from a vrf-lite router.

R1---------------------->R2--------->R3-------------R4-----------R5
vrf-lite CE PE P PE CE vrf RED
vrf RED

i have the vrf RED routes on both the CE routing tables. recently i wanted
to create a tunnel interface between the 2 sites and it just doesn't come
up.

when i configure a tunnel interface on any PE router to the R5 CE router is
works well.

Any magic that is required on the vrf-lite router to get this to work?

Regards

Blogs and organic groups at http://www.ccie.net
Received on Wed Apr 08 2009 - 14:05:02 ART