Re: IS-IS issue over ethernet subinterface

Hello Dheven,

Please provide the following:

1.sh clns nei
2.debug isis adj-packet

Regards,

W.

On Wed, Apr 8, 2009 at 2:57 PM, Dheven <dheven_at_gmail.com> wrote:

> Hi GS,
> I am having a issue setting up IS-IS over ethernet subinterfaces.
>
> here is my setup:
>
> R1 (trunk) ---(trunk) SW1 (trunk) ----(trunk) SW2 (trunk) ----- (trunk) R2
>
>
> R1 Configs:
>
> int fa0/0.12
> encapsulation dot1q 12
> ip address 10.10.10.1 255.255.255.0
> ip router isis
>
> router isis
> net 47.0001.0000.0000.0001.00
>
>
> SW1 configs:
>
> fa0/1
> switchport trunk encap dot1q
> switch port trunk allowed vlan 12
> switch mode trunk
>
> vlan 12 is carried across the trunk link between SW1 and SW2
>
> R2 configs:
>
> Int fa0/0.12
> encapsulation dot1q 12
> ip address 10.10.10.2 255.255.255.0
> ip router isis
>
> router isis
> net 49.0001.0000.0000.0002.00
>
> SW2 configs:
> int fa0/2
> switchport trunk encap dot1q
> switch port trunk allowed vlan 12
> switch mode trunk
>
>
> Please help.
>
> Regards
>
> Dheven
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Apr 08 2009 - 15:29:03 ART