Re: Virtual link problem

Right. I was trying the alternate solution which is Virtual Link. Tunnel
solution works fine though.

The link R3------area1------R1 is PPP.
Rest are FrameRelay serial links. Map statements are ok and inverse arp
disabled on FR links.

The error messages doesn' t stop. Am out of luck ;-(

Naveen.

On Sun, Apr 5, 2009 at 10:44 PM, Salah ElShekeil
<salah.elshekeil_at_gmail.com>wrote:

> this is lab 7 I guess
>
> virtual link is not the solution for this task, tunnel is the solution
>
>
>
> On Mon, Apr 6, 2009 at 8:34 AM, GAURAV MADAN <gauravmadan1177_at_gmail.com>wrote:
>
>> I too faced this sometimes .
>>
>> My suggestion :
>>
>> check ur FR
>> make sure that u have inverse arp disabled and make sure that path u are
>> assuming ; data traffic is going via that only .
>> Have proper mappings and disab inverse arp .
>>
>> HTH
>> Gaurav Madan
>>
>> On Mon, Apr 6, 2009 at 10:47 AM, Naveen <navin.ms_at_gmail.com> wrote:
>>
>> > Hi all,
>> >
>> > I was able to get the Virtual link up b/n R5 and R1, but the error
>> message
>> > "%OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
>> backbone
>> > area must be virtual-link but not found from 163.1.54.4, Serial0/0/0"
>> keeps
>> > coming on routers R1 and R2. The IP address 163.1.54.4 is assigned to
>> > serial
>> > link on R4 connected to area 0.
>> >
>> > *My Scenario is -*
>> >
>> > *R4*-----area0-------*R5*------area1--------*R3*------area1-------*R1*
>> > ------area2-------*R2*
>> > 54.0/24 35.0/24 13.0/24
>> > 12.0/24
>> >
>> > Loopbacks are 150.1.X.X on each router. X = router number.
>> > Major Network = 163.1.0.0/16
>> >
>> > *R4:*
>> > router ospf 1
>> > log-adjacency-changes
>> > network 150.1.4.4 0.0.0.0 area 0
>> > network 163.1.54.4 0.0.0.0 area 0
>> >
>> > *R5:*
>> > router ospf 1
>> > log-adjacency-changes
>> > area 0 range 150.1.4.0 255.255.254.0 cost 734
>> > area 1 virtual-link 150.1.1.1
>> > network 150.1.5.5 0.0.0.0 area 0
>> > network 163.1.35.5 0.0.0.0 area 1
>> > network 163.1.54.5 0.0.0.0 area 0
>> >
>> > *R3:*
>> > router ospf 1
>> > log-adjacency-changes
>> > network 163.1.13.3 0.0.0.0 area 1
>> > network 163.1.35.3 0.0.0.0 area 1
>> >
>> > *R1:*
>> > router ospf 1
>> > log-adjacency-changes
>> > area 1 virtual-link 150.1.5.5
>> > network 150.1.1.1 0.0.0.0 area 1
>> > network 163.1.12.1 0.0.0.0 area 2
>> > network 163.1.13.1 0.0.0.0 area 1
>> >
>> > *R2:*
>> > router ospf 1
>> > log-adjacency-changes
>> > network 163.1.12.2 0.0.0.0 area 2
>> >
>> >
>> > *OSPF adjacencies on routers*
>> >
>> > *R4*# show ip ospf neighbor
>> > Neighbor ID Pri State Dead Time Address
>> Interface
>> > 150.1.5.5 0 FULL/ - 00:00:39 163.1.54.5
>> > Serial0/0/0
>> >
>> > *R5*# show ip ospf neighbor
>> > Neighbor ID Pri State Dead Time Address
>> Interface
>> > 150.1.1.1 0 FULL/ - - 163.1.13.1
>> OSPF_VL0
>> > 150.1.4.4 0 FULL/ - 00:00:33 163.1.54.4
>> > Serial0/0/0.54
>> > 150.1.3.3 0 FULL/ - 00:00:36 163.1.35.3
>> > Serial0/0/0.35
>> >
>> > *R3*# show ip ospf neighbor
>> > Neighbor ID Pri State Dead Time Address
>> Interface
>> > 150.1.1.1 0 FULL/ - 00:00:34 163.1.13.1
>> > Serial0/0/2
>> > 150.1.5.5 0 FULL/ - 00:00:30 163.1.35.5
>> > Serial0/0/0
>> >
>> > *R1*# show ip ospf neighbor
>> > Neighbor ID Pri State Dead Time Address
>> Interface
>> > 150.1.5.5 0 FULL/ - - 163.1.35.5
>> OSPF_VL2
>> > 150.1.3.3 0 FULL/ - 00:00:30 163.1.13.3
>> > Serial0/0/1
>> >
>> > *R2*# show ip ospf neighbor
>> > <no output>
>> >
>> > All help appreciated.
>> > Naveen.
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Apr 05 2009 - 23:05:09 ART