Re: OT: Juniper Olive

When I try -s in boot:
It tries to boot but it freezes and nothing happens.

Loading /boot/defaults/loader.conf
:

What do I wrong?

On Wed, Apr 1, 2009 at 7:41 AM, Fahad Khan <fahad.khan_at_gmail.com> wrote:

> when a router is power on , in start keep pressing "space bar", you will
> get
> "OK" prompt,
>
> then write "boot -s" to boot in single prompt , eventually you will get
>
> "enter full pathname of shell or 'recovery' for root password recovery or
> return for /bin/sh:
>
> here you have to press "enter", you will get "#" prompt
>
> then type "kldload syscall.ko" and press enter
>
> then press ctrl+d for multiuser mode
>
> it may ask you to clean file system, if it does, you need to enter "fsck"
> on
> # prompt
>
> finally you need to press ctrl+d, the router will take you to the login
> prompt, after login you will get shell prompt "%"
>
> here you need to run :
>
> sysctl dev.em.0.fix_em_multicast=1
> sysctl dev.em.1.fix_em_multicast=1
> sysctl dev.em.2.fix_em_multicast=1
> sysctl dev.em.3.fix_em_multicast=1
>
> then enjoy multicasting...
>
> regards,
>
>
>
>
> On Tue, Mar 31, 2009 at 6:17 PM, Persio Pucci <persio_at_gmail.com> wrote:
>
> > Hi, thanks for the info, I was able to download the image but I am not
> > sure when do I have to run the commands :/
> >
> > Where, when and how am I supposed to run the "boot -s" and so on?
> >
> > Regards,
> >
> > On Sat, Mar 28, 2009 at 2:00 AM, Fahad Khan <fahad.khan_at_gmail.com>
> wrote:
> > > You can refer this,
> > >
> > > http://www.netemu.cn/juniperSimulation/20080413/536-1.html
> > >
> > > I can also provide to the clone of vmware running olive but i am
> thinking
> > > how can i send you GBs of data.
> > >
> > > after you install olive, you need to run multicast patch since be
> default
> > > multicasting is not supported if you run multiple routers ona single
> PC.
> > >
> > > 1-Single user mode (cmd = boot -s)
> > > 2- kldload syscall (verify syscall.ko)
> > > 3- ctrl+d
> > > Multiuser mode
> > >
> > > 4-
> > > sysctl dev.em.0.fix_em_multicast=1
> > > sysctl dev.em.1.fix_em_multicast=1
> > > sysctl dev.em.2.fix_em_multicast=1
> > > sysctl dev.em.3.fix_em_multicast=1
> > >
> > > if your router reboots you need to go for the same steps again, so make
> a
> > > habbit of pausing your vitual machine.
> > >
> > >
> > > HTH ,
> > >
> > > regards,
> > >
> > > On Wed, Mar 25, 2009 at 6:48 PM, Persio Pucci <persio_at_gmail.com>
> wrote:
> > >>
> > >> I know how OT (and possibly against the forum rules) this is but I am
> > >> not having much luck on the internet, sooo... bear with me
> > >>
> > >> I am trying to install a Juniper Olive on my computer, either on QEMU
> > >> or VMWare, to no success.
> > >>
> > >> If you are a good soul and can help me out on that, please PM me :)
> > >>
> > >> Thank you!
> > >>
> > >> Persio Pucci
> > >> CCIE# 22112 R&S
> > >>
> > >>
> > >> Blogs and organic groups at http://www.ccie.net
> > >>
> > >>
> _______________________________________________________________________
> > >> Subscription information may be found at:
> > >> http://www.groupstudy.com/list/CCIELab.html
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > > --
> > > Muhammad Fahad Khan
> > > IT Specialist
> > > Global Technology Services, IBM
> > > +92-321-2370510
> > > +92-301-8247638
> > > http://www.linkedin.com/in/muhammadfahadkhan
> > > http://fahad-internetworker.blogspot.com
> > >
> >
>
>
>
> --
> Muhammad Fahad Khan
> IT Specialist
> Global Technology Services, IBM
> +92-321-2370510
> +92-301-8247638
> http://www.linkedin.com/in/muhammadfahadkhan
> http://fahad-internetworker.blogspot.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Apr 01 2009 - 18:38:29 ART