From: ron.wilkerson@gmail.com
Date: Mon Mar 30 2009 - 17:46:00 ART
Isn't there an auto sensing mode?
-----Original Message-----
From: Jason Alex <amr.ccie@gmail.com>
Date: Mon, 30 Mar 2009 20:50:04
To: Cisco certification<ccielab@groupstudy.com>
Subject: LMI Tricky question
Dear All,
Here is the topology below
R1(S0/0)------FRSW------(S0/0)R2
LMI Type on R1 S0/0 is ansi
LMI Type on R2 S0/0 is Cisco
LMI Type on Both Interfaces on the FRSW is Cisco
The Task says that "*You may not change LMI types on R1 , also R2 may not
be configured for LMI type ANSI*"
Is that can be done ?
I got reachablility only when i logon on the FRSW on my lab and changed the
LMI of ther serial interface facing R1 to ANSI
So how to obtain reachability ?
Anyone have an idea
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:08 ART