From: Cisco Fanatic (ebay_products@hotmail.com)
Date: Fri Mar 27 2009 - 18:35:40 ART
Guys my bad, .... long day. Got it working ... end of my day today !!!
-Yuri
> Date: Fri, 27 Mar 2009 15:29:50 -0600
> Subject: Re: Tunnel interface not able to ping
> From: bbartik@ipexpert.com
> To: ebay_products@hotmail.com
> CC: ccielab@groupstudy.com
>
> Wait, Destinations should be 10.x.x.x, not 1.x.x.x :-)
>
> On Fri, Mar 27, 2009 at 3:28 PM, Bryan Bartik <bbartik@ipexpert.com> wrote:
>
> > Hello Yuri,
> >
> > Your tunnel destinations are wrong, they should be the addresses of the
> > physical interfaces (in your scenario), not the opposite end tunnel
address.
> > Try this:
> >
> > R4:
> > interface Tunnel0
> > ip address 1.1.1.4 255.255.255.0
> > tunnel source 10.1.5.4
> > tunnel destination 1.1.5.1
> >
> > R1:
> > interface Tunnel0
> > ip address 1.1.1.1 255.255.255.0
> > tunnel source 10.1.5.1
> > tunnel destination 1.1.5.4
> >
> > -hth
> >
> > Bryan Bartik
> > CCIE #23707, CCNP
> > Sr. Support Engineer - IPexpert, Inc.
> > URL: http://www.IPexpert.com
> >
> >
> >
> > On Fri, Mar 27, 2009 at 3:09 PM, Cisco Fanatic
<ebay_products@hotmail.com>wrote:
> >
> >> All,
> >>
> >> Very simple, but not able to ping the tunnel interfaces ..
> >>
> >> R4
> >> ==
> >> !
> >> interface Tunnel0
> >> ip address 1.1.1.4 255.255.255.0
> >> tunnel source 10.1.5.4
> >> tunnel destination 1.1.1.1
> >> !
> >> interface Ethernet0/0
> >> ip address 10.1.4.4 255.255.255.0
> >> !
> >> interface Serial1/0
> >> ip address 10.1.5.4 255.255.255.0
> >> encapsulation frame-relay
> >> ip ospf network point-to-point
> >> frame-relay interface-dlci 401
> >> !
> >> router ospf 1
> >> log-adjacency-changes
> >> passive-interface default
> >> no passive-interface Ethernet0/0
> >> no passive-interface Serial1/0
> >> no passive-interface Tunnel0
> >> network 1.1.1.4 0.0.0.0 area 0
> >> network 10.1.4.4 0.0.0.0 area 0
> >> network 10.1.5.4 0.0.0.0 area 0
> >> !
> >>
> >> ************************************
> >>
> >> R1
> >> ==
> >> !
> >> interface Tunnel0
> >> ip address 1.1.1.1 255.255.255.0
> >> tunnel source 10.1.5.1
> >> tunnel destination 1.1.1.4
> >> !
> >> interface Ethernet0/0
> >> ip address 10.1.1.1 255.255.255.0
> >> !
> >> interface Serial1/0
> >> ip address 10.1.5.1 255.255.255.0
> >> encapsulation frame-relay
> >> ip ospf network point-to-point
> >> frame-relay interface-dlci 104
> >> !
> >> router ospf 1
> >> log-adjacency-changes
> >> passive-interface default
> >> no passive-interface Ethernet0/0
> >> no passive-interface Serial1/0
> >> no passive-interface Tunnel0
> >> network 1.1.1.1 0.0.0.0 area 0
> >> network 10.1.1.1 0.0.0.0 area 0
> >> network 10.1.5.1 0.0.0.0 area 0
> >> !
> >>
> >> -Yuri
> >>
> >>
> >>
> >>
> >> _________________________________________________________________
> >> Windows Live SkyDrive: Get 25 GB of free online storage.
> >> http://windowslive.com/online/skydrive?ocid=TXT_TAGLM_WL_skydrive_032009
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> > --
> >
> >
>
>
> --
> Bryan Bartik
> CCIE #23707, CCNP
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:07 ART