Re: MPLS TE will not come up

From: Bryan Bartik (bbartik@ipexpert.com)
Date: Thu Mar 26 2009 - 21:57:22 ART

When you use dynamic mode, what is the output of "sho mpls traffic-eng
tunnels tunnel 1"?

On Thu, Mar 26, 2009 at 5:03 PM, ccie preparation <ccie22@gmail.com> wrote:

> Folks,
> I am trying to configure MPLS TE, when i specify option dynamic
> itcomes up no problem, But when I specify explict path it does not come up,
> I have made sure that all the next hops are reachable, any ideas?
>
>
> hostname r1
> !
> boot-start-marker
> boot-end-marker
> !
> !
> no aaa new-model
> memory-size iomem 15
> dot11 syslog
> !
> !
> ip cef
> !
> !
> no ip domain lookup
> --More-- !
> multilink bundle-name authenticated
> mpls traffic-eng tunnels
> !
> !
> voice-card 0
> no dspfarm
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> --More-- !
> !
> !
> !
> archive
> log config
> hidekeys
> !
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 10.10.10.101 255.255.255.255
> !
> interface Tunnel0
> ip unnumbered Loopback0
> tunnel destination 10.10.10.103
> tunnel mode mpls traffic-eng
> tunnel mpls traffic-eng autoroute announce
> --More-- tunnel mpls traffic-eng priority 1 1
> tunnel mpls traffic-eng bandwidth 100
> tunnel mpls traffic-eng path-option 1 dynamic
> no routing dynamic
> !
> interface Tunnel1
> ip unnumbered Loopback0
> tunnel destination 10.10.10.103
> tunnel mode mpls traffic-eng
> tunnel mpls traffic-eng autoroute announce
> tunnel mpls traffic-eng priority 2 2
> tunnel mpls traffic-eng bandwidth 100
> tunnel mpls traffic-eng path-option 1 explicit name LSP1
> no routing dynamic
> !
> interface FastEthernet0/0
> ip address 20.20.10.1 255.255.255.0
> duplex auto
> speed auto
> mpls ip
> mpls traffic-eng tunnels
> ip rsvp bandwidth 1000
> !
> --More-- interface FastEthernet0/1
> ip address 30.30.10.1 255.255.255.0
> duplex auto
> speed auto
> mpls ip
> mpls traffic-eng tunnels
> ip rsvp bandwidth 1000
> !
> interface Serial0/0/0
> ip address 10.10.10.1 255.255.255.240
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> mpls ip
> mpls traffic-eng tunnels
> fair-queue 64 256 48
> frame-relay map ip 10.10.10.2 102 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
> ip rsvp bandwidth 1000
> !
> interface Serial0/0/1
> no ip address
> shutdown
> --More-- clock rate 2000000
> !
> interface Serial0/1/0
> no ip address
> shutdown
> clock rate 2000000
> !
> interface Serial0/1/1
> no ip address
> shutdown
> clock rate 2000000
> !
> router ospf 1
> mpls traffic-eng router-id Loopback0
> mpls traffic-eng area 0
> log-adjacency-changes
> network 10.10.10.0 0.0.0.255 area 0
> network 20.20.10.0 0.0.0.255 area 0
> network 30.30.10.0 0.0.0.255 area 0
> !
> ip forward-protocol nd
> !
> !
> --More-- ip http server
> no ip http secure-server
> !
> ip explicit-path name LSP1 enable
> next-address 30.30.10.1
> next-address 30.30.10.2
> next-address 30.30.30.1
> next-address 30.30.30.2
> next-address 10.10.10.103
> !
> !
> !
> !
> !
> mpls ldp router-id Loopback0
> !
> !
> control-plane
> !
> !
> !
> !
> !
> --More-- !
> !
> !
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> scheduler allocate 20000 1000
> !
> end
>
> r1#
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Bryan Bartik
CCIE #23707, CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:07 ART