From: Kelvin Yeo (kelvinyeo24@yahoo.com.sg)
Date: Mon Mar 23 2009 - 15:19:47 ART
Hi Forum,
Quick and short question.
I have 2 routers with a serial connection. RIP and EIGRP process is enabled
on both routers. No filter-list or any list that will filter routes. 1
loopback has been installed into Router A. RIP and EIGRP has 'network' to
this loopback.
router rip
version 2
network 1.0.0.0 < this is the loopback
network 192.168.1.0
no auto-summary
router eigrp 10
network 0.0.0.0
no auto-summary
On router B, I can see router A's loopback in EIGRP topology table, but I
do not see it in RIP database..and I missing some concept here because I
don't understand this result.
From B's 'debug ip rip', I can see it is receiving the update but it just
doesn't install in the RIP database.
*Mar 1 00:23:18.251: RIP: received v2 update from 192.168.1.1 on Serial1/0
*Mar 1 00:23:18.251: 1.1.1.0/24 via 0.0.0.0 in 1 hops
Anyone can feedback?
Rdgs,
Kelvin
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:06 ART