From: Ali El Moussaoui (mousawi.ali@gmail.com)
Date: Mon Mar 23 2009 - 12:35:43 ART
Thanks for the reply. Actually i checked that but got confused. I have wccp
redirect out on the external interface and ip inspect in on the internal
interface. When i issue the *show fm fie flowmask* command it shows
"INSPECT" feature Enabled while "WCC_EGRESS" disabled.
Once I remove ip inspect from the interface WCC_EGRESS shows as enabled.
i didnt get the workaround mentioned in the link below.
On Mon, Mar 23, 2009 at 5:22 PM, Salah ElShekeil
<salah.elshekeil@gmail.com>wrote:
>
> http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801b42bf.shtml#flowmask
>
> check this,
>
> HTH
>
> On Mon, Mar 23, 2009 at 6:12 PM, Ali El Moussaoui <mousawi.ali@gmail.com
> > wrote:
>
>> Hello Guys,
>>
>> Did anyone face any problem when activating CBAC with WCCP? I found this
>> error in logs:
>> "%FM_EARL7-4-FLOW_FEAT_FLOWMASK_REQ_FAIL: Flowmask request for the flow
>> based feature WCCP for protocol IPv4 is unsuccessful, hardware
>> acceleration
>> may be disabled for the feature"
>>
>> any idea? Note am using 7606 Version 12.2(18)SXF6 with supervisor engine
>> 720 WS-SUP720-3BX
>>
>> Ali
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:06 ART