From: Dale Shaw (dale.shaw@gmail.com)
Date: Sun Mar 22 2009 - 22:03:30 ART
Hi,
On Mon, Mar 23, 2009 at 11:54 AM, Eugene Ward <eward15@juno.com> wrote:
> What does you config look like? DO you happen to have a router-id or IPv4 address on the box?
That was my first reaction -- missing a dotted decimal ID for use as
the OSPFv3 RID. However, the error message is different when there's
nothing eligible as a RID:
R2>en
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#ipv6 unicast-routing
R2(config)#ipv6 router ospf 3
R2(config-rtr)#
*Mar 23 01:11:02.026: %OSPFv3-4-NORTRID: OSPFv3 process 3 could not
pick a router-id,
please configure manually
R2(config-rtr)#do sh run | s ipv6 router
ipv6 router ospf 3
log-adjacency-changes
R2(config-rtr)#end
R2#
R2#sh ipv6 protocols | s ospf
IPv6 Routing Protocol is "ospf 3"
Redistribution:
None
R2#
To the OP: can you reproduce this condition after a reload? What IOS
and platform? What does your config look like?
cheers,
Dale
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:06 ART