From: Nadeem Ansari (nadeem.ansari574@gmail.com)
Date: Tue Mar 17 2009 - 05:20:42 ART
Hi,
1) You can use offset-list while increasing hop count for a perticular route
learned from an interface.
Regards
Nadeem
On Tue, Mar 17, 2009 at 3:31 AM, Tharak Abraham <tharakabraham@gmail.com>wrote:
> Router R3 advertising RIPv2 routes 3.0.0.0/8 and 33.0.0.0/8 out two
> interfaces s1/0 (frame relay) and s2/0(serial)
> As Both these interfaces are connected to the same router, theres a need to
> filter redundant routes !
>
> What are the available methods by which i could permit 3.0.0.0/8 out of
> s2/0
> and 33.0.0.0/8 out of s1/0 respectively and selectively ?
> Please refer the diag below.
>
> 33.0.0.0/8 (lo1)
> |
> (13.0.0.3) s2/0 -------- R3 (RIPv2)------- s1/0 (12.0.0.3)
> |
> 3.0.0.0/8 (lo2)
>
>
> BR,
> Tharak.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:05 ART