Re: storm-control supression level

From: ALL From_NJ (all.from.nj@gmail.com)
Date: Fri Mar 13 2009 - 18:01:39 ARST

Hello,

I hope this finds you doing well.

Here is the link (watch the ugly word wrap)::
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swtrafc.html#wp1085979

Not sure I fully understand your question. You have configured the bcast
level below ...

HTH,

Andrew Lee Lissitz

On Fri, Mar 13, 2009 at 1:09 PM, Cisco Fanatic <ebay_products@hotmail.com>wrote:

> Hi All,
>
> Can someone let me know what's the Suppression levels for broadcast,
> multicast
> and unicast levels?
>
> !
> interface FastEthernet0/1
> storm-control broadcast level 20.00
> !
>
> SW2#sh storm-control
> Interface Filter State Upper Lower Current
> --------- ------------- ----------- ----------- ----------
> Fa0/1 Forwarding 20.00% 20.00% 0.00%
>
> If the falling suppression level is not specified, the switch blocks all
> traffic until the traffic
>
>
> rate drops below the rising suppression level.
>
> Thanks,
> Yeuri
>
> _________________________________________________________________
> Express your personality in color! Preview and select themes for Hotmail..
>
> http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=TXT_MSGTX_
> WL_HM_express_032009#colortheme<http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=TXT_MSGTX_%0AWL_HM_express_032009#colortheme>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Andrew Lee Lissitz
all.from.nj@gmail.com

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:05 ART