From: john jacob (john.jj.jacob@googlemail.com)
Date: Wed Mar 11 2009 - 11:24:33 ARST
Post ur config , we can go through it then .
On Wed, Mar 11, 2009 at 5:12 PM, Dayaa Al Zoubi <cciecool@gmail.com> wrote:
> Sorry i am not that far , still in first lab but i have a problem with the
> tunnel in lab 1 it is not coming up , any of you faced this problem or could
> be my configuration wrong
> thanks
> dayaa
> ccie 21450
>
> On Wed, Mar 11, 2009 at 5:05 PM, john jacob <john.jj.jacob@googlemail.com>
> wrote:
>>
>> Actually local pool is an option instead of DHCP but unfortunately we
>> end up in other issues with Local pool.
>> The issue with local pool is the the ip address learnt via Local Pool
>> (IPCP) default to a /32 subnet .
>> This will have problems with OSPF neighbor realtionship.
>>
>> However Faris has a solution for the DHCP issue , by specifying the
>> Client Identifier in the DHCP scope and it works fine
>>
>> Cheers
>> John
>>
>> On Wed, Mar 11, 2009 at 3:45 PM, Rich Collins <nilsi2002@gmail.com> wrote:
>> > I spent a bit of time with this but could only get a satisfactory
>> > result using local pools. Would that be a possibility instead of
>> > dhcp?
>> >
>> > -Rich
>> >
>> > On Mon, Mar 9, 2009 at 5:40 PM, john jacob
>> > <john.jj.jacob@googlemail.com> wrote:
>> >> Hi ,
>> >>
>> >> Just a bit stuck with PPPoE with IE Lab 6 of SP workbook.
>> >> When i specify the ip address in the DHCP pool via the Host command ,
>> >> the client router ( R3 ) doesn not take the ip .
>> >> However if I specify a Pool via the network Command under the DHCP
>> >> Pool , the client router takes the a randon ip from the pool.
>> >>
>> >> Cant figure out what i am missing . The configs are as below.
>> >>
>> >> R5 -- E0/0
>> >> ------------------------------------------------- E0/1 -- R3
>> >>
>> >> R5 is the Server and R3 is the client
>> >>
>> >> _-------------------------------------------------------------------------------------------------------------------------------------------------------
>> >> R5 - Server configs
>> >>
>> >> ip dhcp pool R3
>> >> network 20.1.35.0 255.255.255.0 ( Client gets and IP
>> >> 20.1.35.1/24 with this command)
>> >> host 20.1.35.3 255.255.255.0 ( client does not
>> >> get any IP with this command ) We need Client to get this IP from R5
>> >>
>> >> vpdn group 1
>> >> accept-dialin
>> >> protocol pppoe
>> >> virtual-template 1
>> >>
>> >> interface virtual-template 1
>> >> ip add 20.1.35.5 255.255.255.0
>> >> peer default ip address dhcp-pool R3
>> >>
>> >> int e0/0
>> >> no ip add
>> >> pppoe enable
>> >>
>> >>
>> >> ------------------------------------------------------------------------------------------------------------------------------------------------------------
>> >>
>> >> R3 - Client config
>> >>
>> >> vpdn enable
>> >> vpdn-group 1
>> >> request- dialin
>> >> protocol pppoe
>> >>
>> >> interface dialer1
>> >> ip address dhcp
>> >> encapsulation ppp
>> >> dialer pool 1
>> >> dialer persistant
>> >>
>> >> int e0/1
>> >> pppoe enable
>> >> pppoe-client dial-pool-number 1
>> >>
>> >>
>> >> ____________________________________________________________________________________________
>> >>
>> >>
>> >>
>> >> Hope some has already gone through this ,
>> >>
>> >> Cheers
>> >> John .
>> >>
>> >>
>> >> Blogs and organic groups at http://www.ccie.net
>> >>
>> >> _______________________________________________________________________
>> >> Subscription information may be found at:
>> >> http://www.groupstudy.com/list/CCIELab.html
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
>>
>>
>>
>> --
>> ______________________________
>> John Jacob
>> CCIE # 19213
>> Core IP Networks
>> Nokia Siemens Networks
>> Dubai, U.A.E
>> Mob: +971 50 4589370
>> ______________________________
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>
>
-- ______________________________ John Jacob CCIE # 19213 Core IP Networks Nokia Siemens Networks Dubai, U.A.E Mob: +971 50 4589370 ______________________________Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART