From: Pavel Bykov (slidersv@gmail.com)
Date: Sun Mar 08 2009 - 08:59:13 ARST
As Shawn mentioned, storm-control will raqte-limit multicast and inform you
when the rate was exceeded:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_50_se/command/reference/cli3.html#wp2278213
But i'm not sure exactly what you are trying to achieve. Rate limiting per
group or multicast traffic as a whole?
On Mon, Feb 16, 2009 at 5:26 PM, jay <jaymhanna@gmail.com> wrote:
> Is there a way to limit multicast traffic arriving on interface and log
> when
> it has been exceeded. I know about the "ip multicast rate-limit" interface,
> and I know it takes an access list for source and group which can be given
> the "log" key word. So if one uses the logged access list method, and lets
> suppose we only use a group list which just allow all groups. Wont the
> logging log all multicast traffic and not only that which exceeds the
> rate-limit?
>
> Is there a better way to do this?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Pavel Bykov ---------------- Don't forget to help stopping the braindumps, use of which reduces value of your certifications. Sign the petition at http://www.stopbraindumps.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART