From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Sat Mar 07 2009 - 11:42:46 ARST
One is a layer 2 and other is at layer 3 interface
On a L2 interface
=============
Rack1SW1(config-if)#ip igmp ?
filter set IGMP filter profile number
max-groups set maximum number of IGMP groups that can be joined
snooping IGMP snooping configuration
On a layer 3 interface
===================
Rack1SW1(config-if)#int vlan 17
Rack1SW1(config-if)#ip ig
Rack1SW1(config-if)#ip igmp ?
access-group IGMP group access group
HTH
Gaurav Madan
On Sat, Mar 7, 2009 at 6:50 PM, Mahmoud shaker <mashaker@gmail.com> wrote:
> HI all
>
> i need to know what is the differance between IP IGMP profile (on interface
> ip IGMP filter) command and ip IGMP access-group if i need to deny the LAN
> from join 239.0.0.0
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART